Can H13 Tool Steel Be Welded? H13 tool steel can be welded, and its weldability is relatively good compared with many high-alloy tool steels. But H13 is an air-hardening hot-work steel with deep hardenability, so welding repairs must control preheat, filler metal, cooling rate, and post-weld tempering. The main risk is cracking in the weld
Can H13 Tool Steel Be Welded? Preheat, Filler & PWHT Guide Read More »
What Are the Disadvantages of D2 Steel? D2 steel has five main disadvantages: low toughness, risk of edge chipping, difficult machining, limited hot hardness, and only moderate corrosion resistance. These limits stem from the same high-alloy structure that gives D2 strong resistance to abrasive wear. Disadvantage of D2 Steel Practical Result Low toughness Higher risk
The Best Tool Steels for Deep Drawing Dies The best tool steels for deep drawing dies are D2/1.2379/SKD11, A2/1.2363/SKD12, O1/1.2510, O2/1.2842, O6, M2/1.3343/SKH51, and M4. The right choice depends on production volume, sheet material, drawing severity, and the die’s failure mode. For long-run dies with abrasive wear, D2 is usually the first choice. For better
Best Tool Steels for Deep Drawing Dies: D2, A2, O1, M2 Read More »
