{"id":15733,"date":"2026-05-31T21:28:14","date_gmt":"2026-05-31T13:28:14","guid":{"rendered":"https:\/\/aobosteel.com\/?p=15733"},"modified":"2026-05-31T21:31:19","modified_gmt":"2026-05-31T13:31:19","slug":"d3-tool-steel-equivalent-grades","status":"publish","type":"post","link":"https:\/\/aobosteel.com\/ko\/blog\/d3-tool-steel-equivalent-grades\/","title":{"rendered":"What Are the Equivalent Grades of D3 Tool Steel?"},"content":{"rendered":"

What Are the Equivalent Grades of D3 Tool Steel?<\/h1>\n\n\n\n

D3 tool steel<\/a> is commonly matched with DIN 1.2080, EN X210Cr12, JIS SKD1, and GB Cr12<\/a> in international steel standards. These grades are used as equivalent references because they share a similar high-carbon and high-chromium composition.<\/p>\n\n\n\n

Standard<\/td>Grade<\/td>Common Description<\/td><\/tr>
AISI \/ ASTM<\/td>D3<\/td>American cold work tool steel grade<\/td><\/tr>
DIN<\/td>1.2080<\/td>German equivalent grade<\/td><\/tr>
EN<\/td>X210Cr12<\/td>European designation for the same steel family<\/td><\/tr>
JIS<\/td>SKD1<\/td>Japanese equivalent grade<\/td><\/tr>
GB<\/td>Cr12<\/td>Chinese equivalent grade<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

For most cold-work tooling applications, these grades are considered practical equivalents. They are mainly used where abrasive wear resistance<\/a> is more important than impact toughness.<\/p>\n\n\n\n

Chemical Composition Comparison<\/h2>\n\n\n\n

The main reason these grades are considered equivalent is their close carbon and chromium content. All four grades are built around high carbon and about 12% chromium.<\/p>\n\n\n\n

Grade<\/td>C %<\/td>Cr %<\/td>Si %<\/td>Mn %<\/td><\/tr>
D3<\/td>2.00\u20132.35<\/td>11.00\u201313.50<\/td>\u22640.60<\/td>\u22640.60<\/td><\/tr>
1.2080 \/ X210Cr12<\/td>1.90\u20132.20<\/td>11.00\u201313.00<\/td>\u22640.40<\/td>\u22640.40<\/td><\/tr>
SKD1<\/td>1.90\u20132.20<\/td>11.00\u201313.00<\/td>\u22640.40<\/td>\u22640.60<\/td><\/tr>
Cr12<\/td>2.00\u20132.30<\/td>11.50\u201313.00<\/td>\u22640.40<\/td>\u22640.40<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

This composition imparts high hardness and strong abrasive wear resistance to these steels after heat treatment<\/a>. The high carbon content supports hardness, while chromium forms hard carbides that resist wear.<\/p>\n\n\n\n

Are D3, 1.2080, SKD1, and Cr12 Exactly the Same?<\/h2>\n\n\n\n

No. They are equivalent grades, but they are not 100 percent the same.<\/p>\n\n\n\n

The difference is in the standard. ASTM, DIN, EN, JIS, and GB do not always use exactly the same chemical range. A batch of Cr12 may work as a D3 equivalent in many tools, but it should not be certified as ASTM D3 unless its composition meets the ASTM D3 limits.<\/p>\n\n\n\n

For normal tooling use, users can select these grades as alternatives. For strict projects, the required standard should be written clearly in the purchase order. The chemical composition, annealed hardness, delivery condition, and mill test certificate should also be checked before shipment.<\/p>\n\n\n\n

In simple terms, D3, 1.2080, SKD1, and Cr12 are practical equivalents for high-wear cold work tooling, but final acceptance should always follow the specified standard.<\/p>","protected":false},"excerpt":{"rendered":"

What Are the Equivalent Grades of D3 Tool Steel? D3 tool steel is commonly matched with DIN 1.2080, EN X210Cr12, JIS SKD1, and GB Cr12 in international steel standards. These grades are used as equivalent references because they share a similar high-carbon and high-chromium composition. Standard Grade Common Description AISI \/ ASTM D3 American cold […]<\/p>\n","protected":false},"author":1,"featured_media":15734,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"content-type":"","_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[22],"tags":[],"class_list":["post-15733","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"yoast_head":"\nWhat Are the Equivalent Grades of D3 Tool Steel? - AoboSteel<\/title>\n<meta name=\"description\" content=\"Learn the common equivalent grades of D3 tool steel, including 1.2080, X210Cr12, SKD1, and Cr12, with a clear chemical composition comparison.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/aobosteel.com\/ko\/blog\/d3-tool-steel-equivalent-grades\/\" \/>\n<meta property=\"og:locale\" content=\"ko_KR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"What Are the Equivalent Grades of D3 Tool Steel?\" \/>\n<meta property=\"og:description\" content=\"Learn the common equivalent grades of D3 tool steel, including 1.2080, X210Cr12, SKD1, and Cr12, with a clear chemical composition comparison.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/aobosteel.com\/ko\/blog\/d3-tool-steel-equivalent-grades\/\" \/>\n<meta property=\"og:site_name\" content=\"AoboSteel\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61565368220197\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/profile.php?id=61565368220197\" \/>\n<meta property=\"article:published_time\" content=\"2026-05-31T13:28:14+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-31T13:31:19+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif\" \/>\n\t<meta property=\"og:image:width\" content=\"1254\" \/>\n\t<meta property=\"og:image:height\" content=\"1254\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Evan\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@AobosteelEvan\" \/>\n<meta name=\"twitter:label1\" content=\"\uae00\uc4f4\uc774\" \/>\n\t<meta name=\"twitter:data1\" content=\"Evan\" \/>\n\t<meta name=\"twitter:label2\" content=\"\uc608\uc0c1 \ub418\ub294 \ud310\ub3c5 \uc2dc\uac04\" \/>\n\t<meta name=\"twitter:data2\" content=\"2\ubd84\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/\"},\"author\":{\"name\":\"Evan\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\"},\"headline\":\"What Are the Equivalent Grades of D3 Tool Steel?\",\"datePublished\":\"2026-05-31T13:28:14+00:00\",\"dateModified\":\"2026-05-31T13:31:19+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/\"},\"wordCount\":322,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Equivalent-Grades-of-D3-Tool-Steel.avif\",\"articleSection\":[\"Blog\"],\"inLanguage\":\"ko-KR\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/\",\"name\":\"What Are the Equivalent Grades of D3 Tool Steel? - AoboSteel\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Equivalent-Grades-of-D3-Tool-Steel.avif\",\"datePublished\":\"2026-05-31T13:28:14+00:00\",\"dateModified\":\"2026-05-31T13:31:19+00:00\",\"description\":\"Learn the common equivalent grades of D3 tool steel, including 1.2080, X210Cr12, SKD1, and Cr12, with a clear chemical composition comparison.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#breadcrumb\"},\"inLanguage\":\"ko-KR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#primaryimage\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Equivalent-Grades-of-D3-Tool-Steel.avif\",\"contentUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/Equivalent-Grades-of-D3-Tool-Steel.avif\",\"width\":1254,\"height\":1254},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/blog\\\/d3-tool-steel-equivalent-grades\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/aobosteel.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"What Are the Equivalent Grades of D3 Tool Steel?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"name\":\"AoboSteel\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/aobosteel.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ko-KR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\",\"name\":\"AoboSteel\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"contentUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"width\":1052,\"height\":592,\"caption\":\"AoboSteel\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\",\"name\":\"Evan\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"caption\":\"Evan\"},\"sameAs\":[\"http:\\\/\\\/www.aobosteel.com\",\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.instagram.com\\\/aobosteel\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\",\"https:\\\/\\\/x.com\\\/AobosteelEvan\",\"https:\\\/\\\/www.youtube.com\\\/@aobosteel\"],\"url\":\"https:\\\/\\\/aobosteel.com\\\/ko\\\/blog\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"What Are the Equivalent Grades of D3 Tool Steel? - AoboSteel","description":"Learn the common equivalent grades of D3 tool steel, including 1.2080, X210Cr12, SKD1, and Cr12, with a clear chemical composition comparison.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/aobosteel.com\/ko\/blog\/d3-tool-steel-equivalent-grades\/","og_locale":"ko_KR","og_type":"article","og_title":"What Are the Equivalent Grades of D3 Tool Steel?","og_description":"Learn the common equivalent grades of D3 tool steel, including 1.2080, X210Cr12, SKD1, and Cr12, with a clear chemical composition comparison.","og_url":"https:\/\/aobosteel.com\/ko\/blog\/d3-tool-steel-equivalent-grades\/","og_site_name":"AoboSteel","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61565368220197","article_author":"https:\/\/www.facebook.com\/profile.php?id=61565368220197","article_published_time":"2026-05-31T13:28:14+00:00","article_modified_time":"2026-05-31T13:31:19+00:00","og_image":[{"width":1254,"height":1254,"url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif","type":"image\/png"}],"author":"Evan","twitter_card":"summary_large_image","twitter_creator":"@AobosteelEvan","twitter_misc":{"\uae00\uc4f4\uc774":"Evan","\uc608\uc0c1 \ub418\ub294 \ud310\ub3c5 \uc2dc\uac04":"2\ubd84"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#article","isPartOf":{"@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/"},"author":{"name":"Evan","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7"},"headline":"What Are the Equivalent Grades of D3 Tool Steel?","datePublished":"2026-05-31T13:28:14+00:00","dateModified":"2026-05-31T13:31:19+00:00","mainEntityOfPage":{"@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/"},"wordCount":322,"commentCount":0,"publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"image":{"@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#primaryimage"},"thumbnailUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif","articleSection":["Blog"],"inLanguage":"ko-KR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/","url":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/","name":"What Are the Equivalent Grades of D3 Tool Steel? - AoboSteel","isPartOf":{"@id":"https:\/\/aobosteel.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#primaryimage"},"image":{"@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#primaryimage"},"thumbnailUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif","datePublished":"2026-05-31T13:28:14+00:00","dateModified":"2026-05-31T13:31:19+00:00","description":"Learn the common equivalent grades of D3 tool steel, including 1.2080, X210Cr12, SKD1, and Cr12, with a clear chemical composition comparison.","breadcrumb":{"@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#breadcrumb"},"inLanguage":"ko-KR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/"]}]},{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#primaryimage","url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif","contentUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif","width":1254,"height":1254},{"@type":"BreadcrumbList","@id":"https:\/\/aobosteel.com\/blog\/d3-tool-steel-equivalent-grades\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/aobosteel.com\/"},{"@type":"ListItem","position":2,"name":"What Are the Equivalent Grades of D3 Tool Steel?"}]},{"@type":"WebSite","@id":"https:\/\/aobosteel.com\/#website","url":"https:\/\/aobosteel.com\/","name":"AoboSteel","description":"","publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/aobosteel.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ko-KR"},{"@type":"Organization","@id":"https:\/\/aobosteel.com\/#organization","name":"AoboSteel","url":"https:\/\/aobosteel.com\/","logo":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/","url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","contentUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","width":1052,"height":592,"caption":"AoboSteel"},"image":{"@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/"]},{"@type":"Person","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7","name":"Evan","image":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","caption":"Evan"},"sameAs":["http:\/\/www.aobosteel.com","https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.instagram.com\/aobosteel\/","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/","https:\/\/x.com\/AobosteelEvan","https:\/\/www.youtube.com\/@aobosteel"],"url":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"}]}},"uagb_featured_image_src":{"full":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"thumbnail":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-150x150.avif",150,150,true],"medium":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-300x300.avif",300,300,true],"medium_large":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-768x768.avif",768,768,true],"large":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-1024x1024.avif",1024,1024,true],"1536x1536":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"2048x2048":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"trp-custom-language-flag":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-12x12.avif",12,12,true]},"uagb_author_info":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"},"uagb_comment_info":0,"uagb_excerpt":"What Are the Equivalent Grades of D3 Tool Steel? D3 tool steel is commonly matched with DIN 1.2080, EN X210Cr12, JIS SKD1, and GB Cr12 in international steel standards. These grades are used as equivalent references because they share a similar high-carbon and high-chromium composition. Standard Grade Common Description AISI \/ ASTM D3 American cold…","rttpg_featured_image_url":{"full":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"landscape":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"portraits":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"thumbnail":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-150x150.avif",150,150,true],"medium":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-300x300.avif",300,300,true],"large":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-1024x1024.avif",1024,1024,true],"1536x1536":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"2048x2048":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel.avif",1254,1254,false],"trp-custom-language-flag":["https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/05\/Equivalent-Grades-of-D3-Tool-Steel-12x12.avif",12,12,true]},"rttpg_author":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"},"rttpg_comment":0,"rttpg_category":"<a href=\"https:\/\/aobosteel.com\/ko\/blog\/category\/blog\/\" rel=\"category tag\">Blog<\/a>","rttpg_excerpt":"What Are the Equivalent Grades of D3 Tool Steel? D3 tool steel is commonly matched with DIN 1.2080, EN X210Cr12, JIS SKD1, and GB Cr12 in international steel standards. These grades are used as equivalent references because they share a similar high-carbon and high-chromium composition. Standard Grade Common Description AISI \/ ASTM D3 American cold…","_links":{"self":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/posts\/15733","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/comments?post=15733"}],"version-history":[{"count":0,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/posts\/15733\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/media\/15734"}],"wp:attachment":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/media?parent=15733"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/categories?post=15733"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/tags?post=15733"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}