{"id":20390,"date":"2026-10-01T00:10:38","date_gmt":"2026-09-30T16:10:38","guid":{"rendered":"https:\/\/aobosteel.com\/?page_id=20390"},"modified":"2026-10-10T20:05:19","modified_gmt":"2026-10-10T12:05:19","slug":"gas-carburizing-carbon-penetration","status":"publish","type":"page","link":"https:\/\/aobosteel.com\/ko\/gas-carburizing-carbon-penetration\/","title":{"rendered":"\uac00\uc2a4 \uce68\ud0c4\uc5d0\uc11c\uc758 \ud0c4\uc18c \uce68\ud22c"},"content":{"rendered":"\n<style> :root{ --aobo-accent:#2563eb; --aobo-accent-dark:#1e1e2e; --aobo-blue:#0c56d0; --aobo-blue-dark:#073b91; --aobo-text:#333; --aobo-muted:#888; --aobo-border:#e5e7eb; --aobo-border-dark:#ddd; --aobo-stripe:#f7f7f9; --aobo-hover:#e8f0fe; --aobo-radius:8px; --aobo-radius-sm:6px; --aobo-orange:#f59e0b; --aobo-fill:#e9ecef; } *{box-sizing:border-box;} html{-webkit-text-size-adjust:100%;} body{margin:0;background:#fff;color:var(--aobo-text); font-family:-apple-system,BlinkMacSystemFont,\"Segoe UI\",Roboto,\"Helvetica Neue\",Arial,sans-serif; font-size:15px;line-height:1.6;} \/* Root scope \u2014 WordPress theme guard *\/ .ts-props{color:var(--aobo-text);background:transparent;padding:0;box-sizing:border-box;line-height:1.6;} .ts-props *{box-sizing:border-box;} .ts-props button,.ts-props input[type=\"text\"]{ background:none !important;border:none !important;border-radius:0 !important;padding:0 !important; margin:0 !important;font-size:inherit !important;font-weight:inherit !important; letter-spacing:normal !important;text-transform:none !important;box-shadow:none !important; line-height:inherit !important;text-decoration:none !important;} .aobo-wrap{max-width:1160px;margin:0 auto;} \/* Hero *\/ .ts-hero{background:#fff;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);overflow:hidden;} .ts-hero-top{padding:1.5em;background:var(--aobo-stripe);border-bottom:1px solid var(--aobo-border);} .ts-kicker{display:inline-flex;align-items:center;gap:6px;color:var(--aobo-accent);background:var(--aobo-hover); border:1px solid var(--aobo-border);border-radius:var(--aobo-radius-sm);padding:4px 8px; font-size:.85em;font-weight:600;margin-bottom:.8em;} .ts-kicker span{width:6px;height:6px;background:var(--aobo-orange);border-radius:50%;display:inline-block;} .ts-hero h1{margin:0;font-size:2rem;line-height:1.3;color:var(--aobo-text);text-align:center;} .ts-hero-top p{margin:.6em auto 0;max-width:820px;font-size:.9em;line-height:1.6;color:var(--aobo-muted);text-align:center;} \/* Tool area *\/ .ts-tool-area{padding:1.5em;} \/* Legend *\/ .ts-legend{display:flex;flex-wrap:wrap;gap:8px;margin-bottom:1em;} .ts-legend > span{display:inline-flex;align-items:center;gap:5px;font-size:.8em;color:var(--aobo-muted); background:var(--aobo-stripe);border:1px solid var(--aobo-border);border-radius:var(--aobo-radius-sm); padding:3px 8px;} .ts-legend b{color:var(--aobo-text);font-weight:600;} .ts-legend .ts-dot{width:9px;height:9px;border-radius:50%;background:var(--aobo-accent);display:inline-block; padding:0;border:0;gap:0;} \/* Controls *\/ .ts-controls{display:flex;flex-wrap:wrap;gap:10px;align-items:center;background:var(--aobo-stripe); border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);padding:1em;margin-bottom:1.2em;} .ts-search{flex:1 1 220px;max-width:340px;position:relative;} .ts-props .ts-search input{width:100% !important;border:1px solid var(--aobo-border-dark) !important; border-radius:var(--aobo-radius-sm) !important;padding:.5em .6em .5em 2em !important; font-size:.92em !important;color:var(--aobo-text) !important;background:#fff !important; outline:none !important;box-shadow:none !important;} .ts-props .ts-search input:focus{border-color:var(--aobo-accent) !important; box-shadow:0 0 0 2px rgba(37,99,235,.12) !important;} .ts-search::before{content:\"\";position:absolute;left:.7em;top:50%;transform:translateY(-50%); width:13px;height:13px;background:var(--aobo-muted); -webkit-mask:url(\"data:image\/svg+xml;utf8,<svg xmlns='http:\/\/www.w3.org\/2000\/svg' viewBox='0 0 24 24' fill='none' stroke='black' stroke-width='2'><circle cx='11' cy='11' r='8'\/><path d='m21 21-4.3-4.3'\/><\/svg>\") center\/contain no-repeat; mask:url(\"data:image\/svg+xml;utf8,<svg xmlns='http:\/\/www.w3.org\/2000\/svg' viewBox='0 0 24 24' fill='none' stroke='black' stroke-width='2'><circle cx='11' cy='11' r='8'\/><path d='m21 21-4.3-4.3'\/><\/svg>\") center\/contain no-repeat;} .ts-chips{display:flex;flex-wrap:wrap;gap:6px;} .ts-props .ts-chip{border:1px solid var(--aobo-border-dark) !important;background:#fff !important; color:var(--aobo-text) !important;border-radius:999px !important;padding:.4em .9em !important; font-size:.8em !important;font-weight:600 !important;cursor:pointer !important;transition:all .15s !important;} .ts-props .ts-chip:hover{background:var(--aobo-hover) !important;border-color:var(--aobo-accent) !important;} .ts-props .ts-chip.on{background:var(--aobo-accent) !important;border-color:var(--aobo-accent) !important;color:#fff !important;} .ts-count{font-size:.8em;color:var(--aobo-muted);margin-left:auto;white-space:nowrap;} \/* Table *\/ .ts-table-wrap{overflow-x:auto;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius); background:#fff;box-shadow:0 1px 2px rgba(16,24,40,.04);} table.ts-table{border-collapse:collapse;width:100%;min-width:880px;font-size:.88em;} .ts-table thead th{position:sticky;top:0;z-index:2;background:var(--aobo-accent-dark);color:#fff; border-bottom:0;border-right:1px solid rgba(255,255,255,.1);text-align:center;padding:.6em .7em; font-size:.82em;font-weight:600;text-transform:none;letter-spacing:.02em;cursor:pointer; white-space:nowrap;user-select:none;} .ts-table thead th:last-child{border-right:0;} .ts-table thead th .ts-arr{color:#ffd166;font-weight:700;margin-left:3px;} .ts-table tbody td{padding:.55em .7em;border-bottom:1px solid var(--aobo-border);text-align:center; vertical-align:middle;white-space:nowrap;} .ts-table tbody tr:nth-child(even){background:var(--aobo-stripe);} .ts-table tbody tr:hover{background:var(--aobo-hover);} .ts-table tbody tr.ts-group td{background:#e8ecf1;font-weight:700;font-size:.78em;letter-spacing:.05em; text-transform:uppercase;color:#3c4043;padding:.55em .7em;border-bottom:1px solid var(--aobo-border); text-align:left;} .ts-table tbody tr:not(.ts-group).ts-hide{display:none;} td.ts-grade{font-weight:700;font-size:.95em;text-align:left;white-space:nowrap;color:var(--aobo-text);} .ts-meter{display:inline-flex;align-items:center;gap:7px;} .ts-meter i{display:inline-block;width:44px;height:6px;border-radius:3px;background:var(--aobo-fill);overflow:hidden;} .ts-meter i b{display:block;height:100%;border-radius:3px;background:linear-gradient(90deg,#4d94ff,var(--aobo-accent));} .ts-meter span{font-size:.9em;font-weight:600;min-width:14px;} .ts-hr{font-variant-numeric:tabular-nums;font-weight:500;} .ts-num{font-variant-numeric:tabular-nums;} .ts-sup{font-size:9px;color:var(--aobo-accent);vertical-align:super;line-height:0;} \/* Footnotes *\/ .ts-notes-list{margin:1.2em 0 0;background:#fff;border:1px solid var(--aobo-border); border-left:3px solid var(--aobo-accent);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0; padding:1em 1.2em 1em 2.2em;font-size:.82em;color:var(--aobo-muted);line-height:1.7;} .ts-notes-list li{margin-bottom:.3em;} .ts-notes-list sup{color:var(--aobo-accent);font-size:10px;} \/* Figure *\/ .ts-fig{margin:1.2em 0 0;background:#fff;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);padding:1em;} .ts-fig img{display:block;width:100%;height:auto;border-radius:6px;} .ts-fig figcaption{font-size:.8em;color:var(--aobo-muted);margin-top:.6em;line-height:1.6;} .ts-fig figcaption b{color:var(--aobo-text);} \/* Info cards *\/ .ts-grid{display:grid;grid-template-columns:repeat(auto-fit,minmax(250px,1fr));gap:14px;margin-top:1.2em;} .ts-grid .ts-card{background:#fff;border:1px solid var(--aobo-border);border-left:3px solid var(--aobo-accent); border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;} .ts-grid h2{font-size:1em;margin:0 0 .4em;color:var(--aobo-text);} .ts-grid p{font-size:.82em;color:var(--aobo-muted);margin:0;line-height:1.7;} .ts-grid p b{color:var(--aobo-text);font-weight:600;} \/* Disclaimer *\/ .ts-disclaimer{margin-top:1.2em;background:#fff;border:1px solid var(--aobo-border); border-left:3px solid var(--aobo-accent);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0; padding:1em 1.2em;} .ts-disclaimer h3{margin:0 0 .5em;font-size:.95em;color:var(--aobo-text);display:flex;align-items:center;gap:6px;} .ts-disclaimer h3::before{content:\"\\2139\";font-size:1em;color:var(--aobo-accent);} .ts-disclaimer p{margin:0 0 .5em;max-width:none;color:var(--aobo-muted);line-height:1.7;} .ts-disclaimer p:last-child{margin-bottom:0;} \/* Empty \/ source *\/ .ts-empty{display:none;text-align:center;color:var(--aobo-muted);padding:2em 1em;font-size:.9em;} .ts-empty.show{display:block;} .ts-source{margin-top:.8em;color:var(--aobo-muted);font-size:.82em;line-height:1.58;} @media (max-width:860px){ .ts-hero-top,.ts-tool-area{padding:1em;} .ts-controls{flex-direction:column;align-items:stretch;} .ts-search{max-width:none;} .ts-count{margin-left:0;} .ts-hero h1{font-size:1.5rem;} } @media (max-width:520px){ .ts-hero-top,.ts-tool-area{padding:.8em;} table.ts-table{font-size:.82em;} .ts-table thead th,.ts-table tbody td{padding:.4em .4em;} } table.ts-table thead th{cursor:default;} table.ts-table td.ts-grade{font-weight:700;} table.ts-table td.ts-type{white-space:normal;text-align:left;font-size:.92em;color:#555;min-width:150px;} table.ts-table td.ts-long{white-space:normal;text-align:left;vertical-align:top;font-size:.92em;color:#444; min-width:260px;line-height:1.55;} table.ts-table td.ts-safe{white-space:normal;text-align:left;vertical-align:top;} table.ts-table tbody tr:hover{background:var(--aobo-hover);} table.ts-table tbody tr.ts-group:hover td{background:#e8ecf1;} .ts-sec{margin:1.8em 0 .5em;font-size:1.02em;color:var(--aobo-text);font-weight:700;} .ts-sec span{display:block;font-size:.8em;font-weight:400;color:var(--aobo-muted);margin-top:.15em;line-height:1.6;} .ts-table-wrap{margin-top:.6em;} .ts-tcap{margin:.5em 0 0;font-size:.78em;color:var(--aobo-muted);line-height:1.6;} .ts-props a{color:var(--aobo-blue) !important;text-decoration:none !important;} .ts-props a:hover{text-decoration:underline !important;} .ts-rel{margin-top:1.2em;background:#fff;border:1px solid var(--aobo-border); border-left:3px solid var(--aobo-blue);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;} .ts-rel h3{margin:0 0 .5em;font-size:.95em;color:var(--aobo-text);} .ts-rel p{margin:0;font-size:.85em;line-height:1.9;color:var(--aobo-muted);} .ts-rel p a{font-weight:600;}\n<\/style>\n<style id=\"aobo-dl-css\">\n.aobo-ht-ref.ts-props .ts-dl{display:flex !important;flex-wrap:wrap;align-items:center;gap:1em; background:var(--aobo-stripe) !important;border:1px solid var(--aobo-border) !important; border-radius:var(--aobo-radius) !important;padding:1.1em 1.3em !important;margin:1.5em 0 !important;}\n.aobo-ht-ref.ts-props .ts-dl-txt{flex:1 1 340px;font-size:.95em;color:var(--aobo-text) !important;line-height:1.55;}\n.aobo-ht-ref.ts-props .ts-dl-txt strong{display:block;font-weight:700 !important;margin-bottom:.2em;color:var(--aobo-text) !important;}\n.aobo-ht-ref.ts-props a.ts-dl-btn{display:inline-flex !important;align-items:center;gap:.5em; background:var(--aobo-blue) !important;color:#fff !important;border:1px solid var(--aobo-blue) !important; border-radius:var(--aobo-radius-sm) !important;padding:.75em 1.35em !important;font-size:.95em !important; font-weight:600 !important;text-decoration:none !important;white-space:nowrap;box-shadow:none !important; line-height:1.3 !important;text-transform:none !important;}\n.aobo-ht-ref.ts-props a.ts-dl-btn:hover,.aobo-ht-ref.ts-props a.ts-dl-btn:focus{background:var(--aobo-blue-dark) !important; border-color:var(--aobo-blue-dark) !important;color:#fff !important;}\n.aobo-ht-ref.ts-props a.ts-dl-btn svg{width:1.05em;height:1.05em;fill:none;stroke:currentColor;stroke-width:2;flex:0 0 auto;}\n@media (max-width:640px){.aobo-ht-ref.ts-props a.ts-dl-btn{width:100%;justify-content:center;}}\n<\/style>\n<script id=\"aobo-dl-ga4\">\ndocument.addEventListener('click', function (e) { var a = e.target.closest ? e.target.closest('a.ts-dl-btn') : null; if (!a || typeof window.gtag !== 'function') return; window.gtag('event', 'pdf_download', { file_name: 'Aobo-Steel-Gas-Carburizing-Carbon-Penetration.pdf', link_url: a.href, page_path: window.location.pathname });\n}, false);\n<\/script>\n<style id=\"aobo-ds\">\n.entry-content[class]{--ds-font-body: Lora,serif;--ds-font-head: Lato,sans-serif;--ds-blue: #0c56d0;--ds-blue-deep: #082d6f;--ds-blue-dark: #073b91;--ds-blue-soft: #eaf2ff;--ds-blue-pale: #f7fbff;--ds-border: #d7e5fb;--ds-border-soft: #e8eef8;--ds-text: #203044;--ds-muted: #617087;--ds-orange: #f59b23;--ds-shadow: 0 18px 45px rgba(12,86,208,0.10);--ds-shadow-sm: 0 12px 32px rgba(12,86,208,0.07);font-family: var(--ds-font-body);line-height: 1.7;-webkit-text-size-adjust: 100%;box-sizing: border-box}.entry-content[class] *,.entry-content[class] *::before,.entry-content[class] *::after{box-sizing: border-box}.entry-content[class] h1{font-family: var(--ds-font-head) !important;font-size: clamp(24px,4vw,min(50px,var(--h1-max,50px))) !important;line-height: 1.08 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 0 0 16px !important}.entry-content[class] h2{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 44px 0 16px !important}.entry-content[class] h3{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.3 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 30px 0 12px !important}.entry-content[class] h4{font-family: var(--ds-font-head) !important;font-size: 19px !important;line-height: 1.35 !important;letter-spacing: 0 !important;font-weight: 700 !important;margin: 24px 0 10px !important}.entry-content[class] p,.entry-content[class] li,.entry-content[class] dd,.entry-content[class] dt{font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important}.entry-content[class] figcaption,.entry-content[class] small,.entry-content[class] .aobo-figure figcaption{font-size: 15px !important;line-height: 1.6 !important}.entry-content[class] table{width: 100%;border-collapse: collapse;background: #ffffff}.entry-content[class] table th,.entry-content[class] table thead th,.entry-content[class] table thead td{background: var(--ds-blue-soft) !important;color: var(--ds-blue-deep) !important;font-family: var(--ds-font-head) !important;font-size: 15px !important;font-weight: 700 !important;line-height: 1.45 !important;text-align: center !important;text-transform: none !important;letter-spacing: 0 !important;padding: 14px 16px !important;border: 0 !important;border-bottom: 1px solid var(--ds-border) !important;vertical-align: top !important;position: static !important}.entry-content[class] table td{font-family: var(--ds-font-body) !important;font-size: 15px !important;line-height: 1.55 !important;padding: 14px 16px !important;border: 0;border-bottom: 1px solid var(--ds-border-soft) !important;vertical-align: top !important;white-space: normal !important;text-align: center !important}.entry-content[class] table tbody tr:last-child td{border-bottom: 0 !important}.entry-content[class] table th.ds-text,.entry-content[class] table td.ds-text{text-align: left !important}.entry-content[class] table tbody tr:nth-child(even){background: #fafcff !important}.entry-content[class] table tbody tr:hover{background: #f2f7ff !important}.entry-content[class] table tbody td:first-child{color: var(--ds-blue-deep);font-weight: 700}.entry-content[class] .aobo-table-wrap,.entry-content[class] .ts-table-wrap{overflow-x: auto;margin: 22px 0 28px;border: 1px solid var(--ds-border);border-radius: 18px;box-shadow: var(--ds-shadow-sm);background: #ffffff}.entry-content[class] h1,.entry-content[class] h2,.entry-content[class] h3,.entry-content[class] h4{color: var(--ds-blue-deep)}.entry-content[class] p,.entry-content[class] li{color: var(--ds-text)}.entry-content[class] a{color: var(--ds-blue);font-weight: 700;text-decoration: none}.entry-content[class] a:hover,.entry-content[class] a:focus{color: var(--ds-orange)}.entry-content[class] .aobo-final-cta h1,.entry-content[class] .aobo-final-cta h2,.entry-content[class] .aobo-final-cta h3,.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-cta h1,.entry-content[class] .aobo-cta h2,.entry-content[class] .aobo-cta h3,.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-cta-buttons,.entry-content[class] .aobo-cta-buttons *,.entry-content[class] .aobo-esr .stat-band h2,.entry-content[class] .aobo-esr .stat-band h3,.entry-content[class] .aobo-esr .stat-band p,.entry-content[class] .aobo-esr .closing h2,.entry-content[class] .aobo-esr .closing h3,.entry-content[class] .aobo-esr .closing p,.entry-content[class] .footcta h2,.entry-content[class] .footcta h3,.entry-content[class] .footcta p,.entry-content[class] .bg-dark h2,.entry-content[class] .bg-dark h3,.entry-content[class] .bg-dark p,.entry-content[class] .ht-header h2,.entry-content[class] .ht-header h3,.entry-content[class] .ts-cta h2,.entry-content[class] .ts-cta h3,.entry-content[class] .aobo-sup .stats h2,.entry-content[class] .aobo-sup .stats h3,.entry-content[class] .aobo-sup .stats p,.entry-content[class] .aobo-sup .cta h2,.entry-content[class] .aobo-sup .cta h3,.entry-content[class] .aobo-sup .cta p{color: inherit}.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-sup .cta p{color: rgba(255,255,255,0.92)}.entry-content[class] .has-ast-global-color-0-background-color,.entry-content[class] .has-ast-global-color-0-background-color *,.entry-content[class] .contact-container,.entry-content[class] .contact-container *{color: #ffffff !important}.entry-content[class] .has-ast-global-color-0-background-color .label-text,.entry-content[class] .has-ast-global-color-0-background-color .label-text *,.entry-content[class] .contact-container .label-text{color: rgba(255,255,255,0.72) !important}.entry-content[class] .aobo-cta h1,.entry-content[class] .aobo-cta h2,.entry-content[class] .aobo-cta h3,.entry-content[class] .aobo-cta h4,.entry-content[class] .cta h1,.entry-content[class] .cta h2,.entry-content[class] .cta h3,.entry-content[class] .cta h4,.entry-content[class] .aobo-final-cta h1,.entry-content[class] .aobo-final-cta h2,.entry-content[class] .aobo-final-cta h3,.entry-content[class] .aobo-final-cta h4{color: #ffffff !important}.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-cta li,.entry-content[class] .cta p,.entry-content[class] .cta li,.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-final-cta li{color: rgba(255,255,255,0.93) !important}.entry-content[class] .aobo-cta p a,.entry-content[class] .aobo-cta li a,.entry-content[class] .cta p a,.entry-content[class] .cta li a,.entry-content[class] .aobo-final-cta p a,.entry-content[class] .aobo-final-cta li a{color: #ffffff !important;text-decoration: underline}.entry-content[class] .aobo-btn-inquiry{color: #ffffff !important}.entry-content[class] .aobo-cta .aobo-btn-inquiry,.entry-content[class] .aobo-final-cta .aobo-btn-inquiry{color: var(--ds-blue) !important}.entry-content[class] .aobo-wrap,.entry-content[class] .aobo-article{max-width: 1180px;margin: 0 auto;padding: 0}.entry-content[class] img{max-width: 100%;height: auto}.entry-content[class] figure{margin: 26px auto 34px;max-width: 860px}.entry-content[class] figure img{display: block;width: 100%;border: 1px solid var(--ds-border);border-radius: 18px;box-shadow: var(--ds-shadow-sm);background: #ffffff}.entry-content[class] .aobo-hero{background: linear-gradient(135deg,#ffffff 0%,#f7fbff 56%,#eaf2ff 100%);border: 1px solid var(--ds-border);border-radius: 28px;padding: 42px 38px;margin-bottom: 24px;box-shadow: var(--ds-shadow);overflow: hidden;position: relative}.entry-content[class] .aobo-hero::after{content: \"\";position: absolute;right: -90px;top: -90px;width: 260px;height: 260px;border-radius: 50%;background: rgba(12,86,208,0.08)}.entry-content[class] .aobo-hero h1,.entry-content[class] .aobo-hero p{position: relative;z-index: 2}.entry-content[class] .aobo-note-box{margin: 34px 0;padding: 22px 24px;border: 1px solid var(--ds-border);border-left: 5px solid var(--ds-orange);border-radius: 16px;background: #fbfdff}.entry-content[class] .aobo-note-box p{margin: 0 0 14px;color: var(--ds-muted) !important;font-style: italic}.entry-content[class] .aobo-note-box p:last-child{margin-bottom: 0}.entry-content[class] .aobo-btn{display: inline-flex;align-items: center;justify-content: center;min-height: 42px;padding: 10px 16px;border-radius: 999px;text-align: center;text-decoration: none;font-family: var(--ds-font-head) !important;font-weight: 700;font-size: 14px !important;line-height: 1.2;transition: all 0.2s ease;cursor: pointer;white-space: nowrap}.entry-content[class] .aobo-btn-primary{background: var(--ds-blue);border: 1px solid var(--ds-blue);color: #ffffff !important}.entry-content[class] .aobo-btn-secondary{background: #ffffff;border: 1px solid var(--ds-border);color: var(--ds-blue) !important}.entry-content[class] .aobo-btn:hover{transform: translateY(-1px)}.entry-content[class] .aobo-supply-actions{display: flex;flex-wrap: wrap;gap: 12px;margin-top: 18px}.entry-content[class] .aobo-supply-actions .aobo-btn{min-width: 190px}.entry-content[class] .aobo-final-cta{margin-top: 34px;padding: 34px;border-radius: 28px;background: linear-gradient(135deg,#073b91 0%,#0c56d0 100%);box-shadow: 0 18px 45px rgba(12,86,208,0.20);display: flex;align-items: center;justify-content: space-between;gap: 20px;flex-wrap: wrap}.entry-content[class] .aobo-final-cta h2{margin: 0 0 12px !important;font-size: 26px !important;color: #ffffff !important}.entry-content[class] .aobo-final-cta p{margin: 0}.entry-content[class] .aobo-final-cta .aobo-btn-primary{background: #ffffff;border-color: #ffffff;color: var(--ds-blue) !important}.entry-content[class] .aobo-final-cta .aobo-btn-secondary{background: transparent;border-color: rgba(255,255,255,0.75);color: #ffffff !important}.entry-content[class] .ts-hero{background: transparent !important;border: 0 !important;border-radius: 0 !important;box-shadow: none !important}.entry-content[class] .ts-hero-top{background: linear-gradient(135deg,#ffffff 0%,#f7fbff 56%,#eaf2ff 100%) !important;border: 1px solid var(--ds-border) !important;border-radius: 28px !important;padding: 42px 38px !important;margin: 0 0 24px !important;box-shadow: var(--ds-shadow) !important;position: relative;overflow: hidden;text-align: left !important}.entry-content[class] .ts-hero-top h1,.entry-content[class] .ts-hero-top p,.entry-content[class] .ts-hero h1{text-align: left !important}.entry-content[class] .ts-hero-top p{max-width: none !important;margin: 0 0 12px !important}.entry-content[class] .ts-tool-area{padding: 0 !important}.entry-content[class] .ts-sec{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 44px 0 16px !important}.entry-content[class] .ts-sec > span{display: block !important;font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important;font-weight: 400 !important;color: var(--ds-text) !important;margin: 0 0 16px !important}.entry-content[class] .ts-kicker{display: inline-flex !important;align-items: center;gap: 7px;margin: 0 0 14px !important;padding: 6px 14px !important;border: 1px solid var(--ds-border) !important;border-radius: 999px !important;background: #ffffff !important;color: var(--ds-blue) !important;font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important;letter-spacing: 0 !important;text-transform: none !important}.entry-content[class] .ts-p,.entry-content[class] .card-desc,.entry-content[class] .aobo-strip-intro,.entry-content[class] .schema-faq-answer{font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important;font-weight: 400 !important}.entry-content[class] .lead,.entry-content[class] .fund-lead{font-family: var(--ds-font-body) !important;font-size: 19px !important;line-height: 1.65 !important;font-weight: 400 !important}.entry-content[class] .ts-h2{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 44px 0 16px !important}.entry-content[class] .ts-h3{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.3 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 30px 0 12px !important}.entry-content[class] .card-grade{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.25 !important;font-weight: 700 !important}.entry-content[class] .schema-faq-question{font-family: var(--ds-font-head) !important;font-size: 19px !important;line-height: 1.4 !important;font-weight: 700 !important;color: var(--ds-blue-deep) !important}.entry-content[class] .ts-source,.entry-content[class] .ts-hint,.entry-content[class] .ts-placeholder,.entry-content[class] .ht-spec-label,.entry-content[class] .ht-spec-value,.entry-content[class] .ht-step-indicator,.entry-content[class] .ht-badge,.entry-content[class] .idx,.entry-content[class] .xlink,.entry-content[class] .cat-note,.entry-content[class] .aobo-card-note,.entry-content[class] .card-desig,.entry-content[class] .k,.entry-content[class] .v,.entry-content[class] .note,.entry-content[class] .aobo-note{font-family: var(--ds-font-head) !important;font-size: 15px !important;line-height: 1.6 !important;font-weight: 400 !important}.entry-content[class] .ht-spec-label,.entry-content[class] .idx,.entry-content[class] .k{font-weight: 700 !important}.entry-content[class] .aobo-note,.entry-content[class] .note{font-family: var(--ds-font-body) !important;color: var(--ds-muted) !important}.entry-content[class] .chip{font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important}.entry-content[class] .kicker,.entry-content[class] .eyebrow,.entry-content[class] .aobo-eyebrow{display: inline-flex !important;align-items: center;gap: 7px;margin: 0 0 14px !important;padding: 6px 14px !important;border: 1px solid var(--ds-border) !important;border-radius: 999px !important;background: #ffffff !important;color: var(--ds-blue) !important;font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important;letter-spacing: 0 !important;text-transform: none !important}@media (max-width: 760px){.entry-content[class] h1{font-size: clamp(22px,6.4vw,min(34px,var(--h1-max,34px))) !important}.entry-content[class] h2{font-size: 25px !important}.entry-content[class] h3{font-size: 20px !important}.entry-content[class] h4{font-size: 17px !important}.entry-content[class] p,.entry-content[class] li{font-size: 16px !important}.entry-content[class] table th,.entry-content[class] table td{font-size: 14px !important;padding: 11px 12px !important}.entry-content[class] .aobo-hero{padding: 30px 22px}.entry-content[class] .aobo-final-cta{padding: 26px 22px}.entry-content[class] .aobo-final-cta .aobo-btn{width: 100%}}\n<\/style>\n<section class=\"aobo-ht-ref ts-props\">\n<div class=\"aobo-wrap\">\n<div class=\"ts-hero\">\n<div class=\"ts-hero-top\">\n<div class=\"ts-kicker\"><span><\/span>Case Hardening | Carburizing<\/div>\n<h1 style=\"--h1-max:64px\">Carbon Penetration in Gas Carburizing<\/h1>\n<p>Carbon content in each half millimetre layer of a round bar after seven hours in carburizing gas, at temperatures from 700 to 1150 degrees C. A reference summary of published practice and not an Aobo Steel specification.<\/p><\/div>\n<div class=\"ts-tool-area\">\n<h2 class=\"ts-h2\">What the figures measure<\/h2>\n<p class=\"ts-p\">The table below is a carbon profile through a case, not a single case depth figure. A round bar was held in illuminating gas for seven hours at one temperature, then turned down half a millimetre at a time and each successive layer analysed for carbon. The bar was not quenched and no case depth was measured directly. What the source publishes is the amount of carbon that reached each layer, and that is what makes the set useful when a shop is choosing a carburizing temperature rather than a time.<\/p>\n<p class=\"ts-p\">The experiments were made by R. Bruch and recorded in the reports of the Metallurgical School at Aachen. They are reproduced in The Heat Treatment of Tool Steel, written for tool shops where a case is used to give a tough core a wear resistant skin.<\/p> <h2 class=\"ts-h2\">Carbon in successive half millimetre layers<\/h2>\n<h3 class=\"ts-h3\">Per cent carbon in each 0.5 mm layer, seven hours in carburizing gas<\/h3>\n<div class=\"ts-table-wrap\">\n<table class=\"ts-table\" style=\"min-width:820px;\">\n<thead><tr><th>Temperature<\/th><th>Layer 1 (0 to 0.5 mm)<\/th><th>Layer 2 (0.5 to 1.0 mm)<\/th><th>Layer 3 (1.0 to 1.5 mm)<\/th><th>Layer 4 (1.5 to 2.0 mm)<\/th><th>Layer 5 (2.0 to 2.5 mm)<\/th><\/tr><\/thead>\n<tbody><tr><td class=\"ts-num\">700 &#176;C<\/td><td class=\"ts-num\">0.096<\/td><td class=\"ts-num\">0.045<\/td><td class=\"ts-num\">0.036<\/td><td class=\"ts-num\">&#8211;<\/td><td class=\"ts-num\">&#8211;<\/td><\/tr><tr><td class=\"ts-num\">800 &#176;C<\/td><td class=\"ts-num\">0.210<\/td><td class=\"ts-num\">0.105<\/td><td class=\"ts-num\">0.048<\/td><td class=\"ts-num\">&#8211;<\/td><td class=\"ts-num\">&#8211;<\/td><\/tr><tr><td class=\"ts-num\">900 &#176;C<\/td><td class=\"ts-num\">0.363<\/td><td class=\"ts-num\">0.210<\/td><td class=\"ts-num\">0.057<\/td><td class=\"ts-num\">&#8211;<\/td><td class=\"ts-num\">&#8211;<\/td><\/tr><tr><td class=\"ts-num\">1000 &#176;C<\/td><td class=\"ts-num\">0.579<\/td><td class=\"ts-num\">0.321<\/td><td class=\"ts-num\">0.241<\/td><td class=\"ts-num\">0.152<\/td><td class=\"ts-num\">0.091<\/td><\/tr><tr><td class=\"ts-num\">1050 &#176;C<\/td><td class=\"ts-num\">0.594<\/td><td class=\"ts-num\">0.365<\/td><td class=\"ts-num\">0.332<\/td><td class=\"ts-num\">0.212<\/td><td class=\"ts-num\">0.150<\/td><\/tr><tr><td class=\"ts-num\">1100 &#176;C<\/td><td class=\"ts-num\">1.522<\/td><td class=\"ts-num\">1.487<\/td><td class=\"ts-num\">1.284<\/td><td class=\"ts-num\">1.147<\/td><td class=\"ts-num\">0.988<\/td><\/tr><tr><td class=\"ts-num\">1150 &#176;C<\/td><td class=\"ts-num\">1.637<\/td><td class=\"ts-num\">1.604<\/td><td class=\"ts-num\">1.382<\/td><td class=\"ts-num\">1.330<\/td><td class=\"ts-num\">1.195<\/td><\/tr><\/tbody>\n<\/table>\n<\/div>\n<p class=\"ts-tcap\"><em>Source, the carburizing table on The Heat Treatment of Tool Steel (Harry Brearley).<\/em><\/p>\n<p class=\"ts-tcap\"><em>A round bar was exposed to illuminating gas for seven hours at each temperature, then turned down half a millimetre at a time and each layer analysed. Values are per cent carbon as the source publishes them. A dash means the source gives no figure, which is why the three lowest temperatures carry no reading below the third layer.<\/em><\/p>\n<p class=\"ts-p\">The carbon gradients measured on production carburized alloy steels are plotted below against depth.<\/p>\n<figure class=\"ts-fig\"><img src=\"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg\" alt=\"Carbon gradients of computer-controlled gas carburized alloy steels, carbon content against distance below the surface\" width=\"1329\" height=\"735\" loading=\"lazy\" decoding=\"async\"><figcaption>Fig. 7.10. Carbon gradients of alloyed carburizing steels, computer controlled gas carburizing, carbon content against distance below the surface. These are the measured gradients that the hardness profiles in the next figure were produced from. Source: J. Grosch, Heat Treatment with Gaseous Atmospheres, in Steel Heat Treatment: Metallurgy and Technologies (G.E. Totten, ed.), CRC Press, 2006, Fig. 7.10.<\/figcaption><\/figure> <h2 class=\"ts-h2\">Where the temperature threshold sits<\/h2>\n<p class=\"ts-p\">Read the first layer down the column. Between 700 and 900 degrees C the case grows slowly, from 0.096 to 0.363 per cent, and the rise is close to linear. From 900 to 1050 degrees C the same step in temperature buys a much larger step in carbon, 0.363 to 0.594 per cent, and at 1100 degrees C the figure breaks away altogether at 1.522 per cent, which is far above the carbon level of any tool steel supplied for a through hardened part.<\/p>\n<p class=\"ts-p\">That break is the practical point of the table. A shop working above roughly 1050 degrees C in a carbon rich atmosphere is not carburizing any faster in a controlled way, it is supercarburizing, and the free cementite that forms in the outer skin is what produces the freckled corners and spalling that case hardened parts are known for. The commercial window sits below that, and the table shows why the usual figure of 900 to 950 degrees C is where it is.<\/p> <h2 class=\"ts-h2\">How steep the carbon gradient is<\/h2>\n<p class=\"ts-p\">At 1000 degrees C the first layer reaches 0.579 per cent and the fifth has fallen to 0.091 per cent, a drop of roughly six to one across 2.5 mm. The gradient is what a machining allowance has to clear. If a shop takes off a quarter of a millimetre after carburizing to true up a surface, it removes part of the richest layer and the finished case starts softer than the table suggests. The same reading works in the other direction when a part is ground after hardening.<\/p>\n<p class=\"ts-p\">The 1100 and 1150 degrees C rows also show how quickly the profile flattens once the surface is saturated. Layer 1 and layer 2 differ by only 0.035 per cent at 1100 degrees C and 0.033 per cent at 1150 degrees C, against 0.258 per cent at 1000 degrees C. Once the surface can take no more carbon, further time and temperature push carbon inward instead of upward, and the case grows deeper rather than richer.<\/p>\n<p class=\"ts-p\">Figures are published experimental values and are a reference summary only. Actual results vary with the atmosphere, the steel and <a href=\"https:\/\/aobosteel.com\/tool-steel-hardening-furnaces-salt-bath\/\">the furnace<\/a>. Confirm against the material test certificate (MTC) or contact Aobo Steel.<\/p>\n<p class=\"ts-p\">The same specimens, measured for hardness instead of carbon.<\/p>\n<figure class=\"ts-fig\"><img src=\"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-11-hardness-gradients-carburized-case.jpg\" alt=\"Hardness gradients of carburized microstructures, hardness HV1 against distance below the surface, for the same specimens as the carbon gradients\" width=\"1346\" height=\"709\" loading=\"lazy\" decoding=\"async\"><figcaption>Fig. 7.11. Hardness gradients of the carburized microstructures whose carbon gradients are shown in Fig. 7.10, hardness HV1 against distance from the surface. Case depth is read off this curve at the limiting hardness, which the accompanying text of the source puts at 550 HV1. Source: J. Grosch, Heat Treatment with Gaseous Atmospheres, in Steel Heat Treatment: Metallurgy and Technologies (G.E. Totten, ed.), CRC Press, 2006, Fig. 7.11.<\/figcaption><\/figure> <h2 class=\"ts-h2\">Related reference data<\/h2>\n<p class=\"ts-p\">The process side of the same subject is set out on our <a href=\"https:\/\/aobosteel.com\/blog\/case-hardening-steel-guide\/\">case hardening guide<\/a>, and the competing diffusion treatment is on the <a href=\"https:\/\/aobosteel.com\/tool-steel-nitriding-guide\/\">tool steel nitriding guide<\/a>. For tooling that has to survive the same abrasive conditions as a case hardened surface, see <a href=\"https:\/\/aobosteel.com\/d2-tool-steel\/\">D2 tool steel<\/a>, <a href=\"https:\/\/aobosteel.com\/h13-tool-steel\/\">H13 tool steel<\/a> and the <a href=\"https:\/\/aobosteel.com\/blog\/tool-steel-surface-treatment\/\">tool steel surface treatment<\/a> page.<\/p>\n<div class=\"ts-dl\"> <div class=\"ts-dl-txt\"><strong>Carburizing penetration chart, printable PDF<\/strong> Carbon content in each 0.5 mm layer after seven hours at 700 to 1150 degrees C, in one PDF with our contact details.<\/div> <a class=\"ts-dl-btn\" href=\"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-Carbon-Penetration.pdf\" download> <svg viewBox=\"0 0 24 24\" aria-hidden=\"true\"><path d=\"M12 3v12m0 0 4.5-4.5M12 15l-4.5-4.5M4 20h16\"\/><\/svg> Download PDF, 369 KB <\/a> <\/div>\n<p class=\"ts-source\">Source: The Heat Treatment of Tool Steel (Harry Brearley).<\/p>\n<\/div><\/div><\/div><\/section>\n","protected":false},"excerpt":{"rendered":"<p>Case Hardening | Carburizing Carbon Penetration in Gas Carburizing Carbon content in each half millimetre layer of a round bar after seven hours in carburizing gas, at temperatures from 700 to 1150 degrees C. A reference summary of published practice and not an Aobo Steel specification. What the figures measure The table below is a [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-20390","page","type-page","status-publish","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v28.6 (Yoast SEO v28.6) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Gas Carburizing Carbon Penetration Chart<\/title>\n<meta name=\"description\" content=\"Carbon content in each 0.5 mm layer after seven hours of gas carburizing at 700 to 1150 degrees C, from published experiments, for reference.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/aobosteel.com\/ko\/gas-carburizing-carbon-penetration\/\" \/>\n<meta property=\"og:locale\" content=\"ko_KR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Carbon Penetration in Gas Carburizing\" \/>\n<meta property=\"og:description\" content=\"Carbon content in each 0.5 mm layer after seven hours of gas carburizing at 700 to 1150 degrees C, from published experiments, for reference.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/aobosteel.com\/ko\/gas-carburizing-carbon-penetration\/\" \/>\n<meta property=\"og:site_name\" content=\"AoboSteel\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61565368220197\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-10T12:05:19+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\uc608\uc0c1 \ub418\ub294 \ud310\ub3c5 \uc2dc\uac04\" \/>\n\t<meta name=\"twitter:data1\" content=\"4\ubd84\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/\"},\"author\":{\"name\":\"Evan\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\"},\"headline\":\"Carbon Penetration in Gas Carburizing\",\"datePublished\":\"2026-09-30T16:10:38+00:00\",\"dateModified\":\"2026-10-10T12:05:19+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/\"},\"wordCount\":890,\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg\",\"inLanguage\":\"ko-KR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/\",\"name\":\"Gas Carburizing Carbon Penetration Chart\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg\",\"datePublished\":\"2026-09-30T16:10:38+00:00\",\"dateModified\":\"2026-10-10T12:05:19+00:00\",\"description\":\"Carbon content in each 0.5 mm layer after seven hours of gas carburizing at 700 to 1150 degrees C, from published experiments, for reference.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#breadcrumb\"},\"inLanguage\":\"ko-KR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#primaryimage\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg\",\"contentUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/gas-carburizing-carbon-penetration\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/aobosteel.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Carbon Penetration in Gas Carburizing\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"name\":\"AoboSteel\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/aobosteel.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ko-KR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\",\"name\":\"AoboSteel\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"contentUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"width\":1052,\"height\":592,\"caption\":\"AoboSteel\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\",\"name\":\"Evan\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"caption\":\"Evan\"},\"sameAs\":[\"http:\\\/\\\/www.aobosteel.com\",\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.instagram.com\\\/aobosteel\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\",\"https:\\\/\\\/x.com\\\/AobosteelEvan\",\"https:\\\/\\\/www.youtube.com\\\/@aobosteel\"],\"url\":\"https:\\\/\\\/aobosteel.com\\\/ko\\\/blog\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Gas Carburizing Carbon Penetration Chart","description":"Carbon content in each 0.5 mm layer after seven hours of gas carburizing at 700 to 1150 degrees C, from published experiments, for reference.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/aobosteel.com\/ko\/gas-carburizing-carbon-penetration\/","og_locale":"ko_KR","og_type":"article","og_title":"Carbon Penetration in Gas Carburizing","og_description":"Carbon content in each 0.5 mm layer after seven hours of gas carburizing at 700 to 1150 degrees C, from published experiments, for reference.","og_url":"https:\/\/aobosteel.com\/ko\/gas-carburizing-carbon-penetration\/","og_site_name":"AoboSteel","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61565368220197","article_modified_time":"2026-10-10T12:05:19+00:00","og_image":[{"url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_misc":{"\uc608\uc0c1 \ub418\ub294 \ud310\ub3c5 \uc2dc\uac04":"4\ubd84"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#article","isPartOf":{"@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/"},"author":{"name":"Evan","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7"},"headline":"Carbon Penetration in Gas Carburizing","datePublished":"2026-09-30T16:10:38+00:00","dateModified":"2026-10-10T12:05:19+00:00","mainEntityOfPage":{"@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/"},"wordCount":890,"publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"image":{"@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#primaryimage"},"thumbnailUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg","inLanguage":"ko-KR"},{"@type":"WebPage","@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/","url":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/","name":"Gas Carburizing Carbon Penetration Chart","isPartOf":{"@id":"https:\/\/aobosteel.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#primaryimage"},"image":{"@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#primaryimage"},"thumbnailUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg","datePublished":"2026-09-30T16:10:38+00:00","dateModified":"2026-10-10T12:05:19+00:00","description":"Carbon content in each 0.5 mm layer after seven hours of gas carburizing at 700 to 1150 degrees C, from published experiments, for reference.","breadcrumb":{"@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#breadcrumb"},"inLanguage":"ko-KR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/"]}]},{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#primaryimage","url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg","contentUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Gas-Carburizing-totten-fig-7-10-carbon-gradients-carburized-steels.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/aobosteel.com\/gas-carburizing-carbon-penetration\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/aobosteel.com\/"},{"@type":"ListItem","position":2,"name":"Carbon Penetration in Gas Carburizing"}]},{"@type":"WebSite","@id":"https:\/\/aobosteel.com\/#website","url":"https:\/\/aobosteel.com\/","name":"\uc544\uc624\ubcf4\uc2a4\ud2f8","description":"","publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/aobosteel.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ko-KR"},{"@type":"Organization","@id":"https:\/\/aobosteel.com\/#organization","name":"\uc544\uc624\ubcf4\uc2a4\ud2f8","url":"https:\/\/aobosteel.com\/","logo":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/","url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","contentUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","width":1052,"height":592,"caption":"AoboSteel"},"image":{"@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/"]},{"@type":"Person","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7","name":"\uc5d0\ubc18","image":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","caption":"Evan"},"sameAs":["http:\/\/www.aobosteel.com","https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.instagram.com\/aobosteel\/","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/","https:\/\/x.com\/AobosteelEvan","https:\/\/www.youtube.com\/@aobosteel"],"url":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"}]}},"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"trp-custom-language-flag":false},"uagb_author_info":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"},"uagb_comment_info":0,"uagb_excerpt":"Case Hardening | Carburizing Carbon Penetration in Gas Carburizing Carbon content in each half millimetre layer of a round bar after seven hours in carburizing gas, at temperatures from 700 to 1150 degrees C. A reference summary of published practice and not an Aobo Steel specification. What the figures measure The table below is a&hellip;","rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"},"rttpg_comment":0,"rttpg_category":null,"rttpg_excerpt":"Case Hardening | Carburizing Carbon Penetration in Gas Carburizing Carbon content in each half millimetre layer of a round bar after seven hours in carburizing gas, at temperatures from 700 to 1150 degrees C. A reference summary of published practice and not an Aobo Steel specification. What the figures measure The table below is a&hellip;","_links":{"self":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages\/20390","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/comments?post=20390"}],"version-history":[{"count":6,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages\/20390\/revisions"}],"predecessor-version":[{"id":21645,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages\/20390\/revisions\/21645"}],"wp:attachment":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/media?parent=20390"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}