{"id":19283,"date":"2026-09-19T07:27:32","date_gmt":"2026-09-18T23:27:32","guid":{"rendered":"https:\/\/aobosteel.com\/?page_id=19283"},"modified":"2026-09-19T07:43:43","modified_gmt":"2026-09-18T23:43:43","slug":"tool-steel-abrasive-wear-test-data","status":"publish","type":"page","link":"https:\/\/aobosteel.com\/ko\/tool-steel-abrasive-wear-test-data\/","title":{"rendered":"\uacf5\uad6c\uac15 \uc5f0\ub9c8 \ub9c8\ubaa8 \uc2dc\ud5d8 \ub370\uc774\ud130"},"content":{"rendered":"<style>\n:root{\n    --aobo-accent:#2563eb; --aobo-accent-dark:#1e1e2e; --aobo-blue:#0c56d0; --aobo-blue-dark:#073b91;\n    --aobo-text:#333; --aobo-muted:#888; --aobo-border:#e5e7eb; --aobo-border-dark:#ddd;\n    --aobo-stripe:#f7f7f9; --aobo-hover:#e8f0fe; --aobo-radius:8px; --aobo-radius-sm:6px;\n    --aobo-orange:#f59e0b; --aobo-fill:#e9ecef;\n  }\n  *{box-sizing:border-box;}\n  html{-webkit-text-size-adjust:100%;}\n  body{margin:0;background:#fff;color:var(--aobo-text);\n    font-family:-apple-system,BlinkMacSystemFont,\"Segoe UI\",Roboto,\"Helvetica Neue\",Arial,sans-serif;\n    font-size:15px;line-height:1.6;}\n\n  \/* Root scope \u2014 WordPress theme guard *\/\n  .ts-props{color:var(--aobo-text);background:transparent;padding:0;box-sizing:border-box;line-height:1.6;}\n  .ts-props *{box-sizing:border-box;}\n  .ts-props button,.ts-props input[type=\"text\"]{\n    background:none !important;border:none !important;border-radius:0 !important;padding:0 !important;\n    margin:0 !important;font-size:inherit !important;font-weight:inherit !important;\n    letter-spacing:normal !important;text-transform:none !important;box-shadow:none !important;\n    line-height:inherit !important;text-decoration:none !important;}\n\n  .aobo-wrap{max-width:1160px;margin:0 auto;}\n\n  \/* Hero *\/\n  .ts-hero{background:#fff;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);overflow:hidden;}\n  .ts-hero-top{padding:1.5em;background:var(--aobo-stripe);border-bottom:1px solid var(--aobo-border);}\n  .ts-kicker{display:inline-flex;align-items:center;gap:6px;color:var(--aobo-accent);background:var(--aobo-hover);\n    border:1px solid var(--aobo-border);border-radius:var(--aobo-radius-sm);padding:4px 8px;\n    font-size:.85em;font-weight:600;margin-bottom:.8em;}\n  .ts-kicker span{width:6px;height:6px;background:var(--aobo-orange);border-radius:50%;display:inline-block;}\n  .ts-hero h1{margin:0;font-size:2rem;line-height:1.3;color:var(--aobo-text);text-align:center;}\n  .ts-hero-top p{margin:.6em auto 0;max-width:820px;font-size:.9em;line-height:1.6;color:var(--aobo-muted);text-align:center;}\n\n  \/* Tool area *\/\n  .ts-tool-area{padding:1.5em;}\n\n  \/* Legend *\/\n  .ts-legend{display:flex;flex-wrap:wrap;gap:8px;margin-bottom:1em;}\n  .ts-legend > span{display:inline-flex;align-items:center;gap:5px;font-size:.8em;color:var(--aobo-muted);\n    background:var(--aobo-stripe);border:1px solid var(--aobo-border);border-radius:var(--aobo-radius-sm);\n    padding:3px 8px;}\n  .ts-legend b{color:var(--aobo-text);font-weight:600;}\n  .ts-legend .ts-dot{width:9px;height:9px;border-radius:50%;background:var(--aobo-accent);display:inline-block;\n    padding:0;border:0;gap:0;}\n\n  \/* Controls *\/\n  .ts-controls{display:flex;flex-wrap:wrap;gap:10px;align-items:center;background:var(--aobo-stripe);\n    border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);padding:1em;margin-bottom:1.2em;}\n  .ts-search{flex:1 1 220px;max-width:340px;position:relative;}\n  .ts-props .ts-search input{width:100% !important;border:1px solid var(--aobo-border-dark) !important;\n    border-radius:var(--aobo-radius-sm) !important;padding:.5em .6em .5em 2em !important;\n    font-size:.92em !important;color:var(--aobo-text) !important;background:#fff !important;\n    outline:none !important;box-shadow:none !important;}\n  .ts-props .ts-search input:focus{border-color:var(--aobo-accent) !important;\n    box-shadow:0 0 0 2px rgba(37,99,235,.12) !important;}\n  .ts-search::before{content:\"\";position:absolute;left:.7em;top:50%;transform:translateY(-50%);\n    width:13px;height:13px;background:var(--aobo-muted);\n    -webkit-mask:url(\"data:image\/svg+xml;utf8,<svg xmlns='http:\/\/www.w3.org\/2000\/svg' viewBox='0 0 24 24' fill='none' stroke='black' stroke-width='2'><circle cx='11' cy='11' r='8'\/><path d='m21 21-4.3-4.3'\/><\/svg>\") center\/contain no-repeat;\n    mask:url(\"data:image\/svg+xml;utf8,<svg xmlns='http:\/\/www.w3.org\/2000\/svg' viewBox='0 0 24 24' fill='none' stroke='black' stroke-width='2'><circle cx='11' cy='11' r='8'\/><path d='m21 21-4.3-4.3'\/><\/svg>\") center\/contain no-repeat;}\n  .ts-chips{display:flex;flex-wrap:wrap;gap:6px;}\n  .ts-props .ts-chip{border:1px solid var(--aobo-border-dark) !important;background:#fff !important;\n    color:var(--aobo-text) !important;border-radius:999px !important;padding:.4em .9em !important;\n    font-size:.8em !important;font-weight:600 !important;cursor:pointer !important;transition:all .15s !important;}\n  .ts-props .ts-chip:hover{background:var(--aobo-hover) !important;border-color:var(--aobo-accent) !important;}\n  .ts-props .ts-chip.on{background:var(--aobo-accent) !important;border-color:var(--aobo-accent) !important;color:#fff !important;}\n  .ts-count{font-size:.8em;color:var(--aobo-muted);margin-left:auto;white-space:nowrap;}\n\n  \/* Table *\/\n  .ts-table-wrap{overflow-x:auto;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);\n    background:#fff;box-shadow:0 1px 2px rgba(16,24,40,.04);}\n  table.ts-table{border-collapse:collapse;width:100%;min-width:880px;font-size:.88em;}\n  .ts-table thead th{position:sticky;top:0;z-index:2;background:var(--aobo-accent-dark);color:#fff;\n    border-bottom:0;border-right:1px solid rgba(255,255,255,.1);text-align:center;padding:.6em .7em;\n    font-size:.82em;font-weight:600;text-transform:none;letter-spacing:.02em;cursor:pointer;\n    white-space:nowrap;user-select:none;}\n  .ts-table thead th:last-child{border-right:0;}\n  .ts-table thead th .ts-arr{color:#ffd166;font-weight:700;margin-left:3px;}\n  .ts-table tbody td{padding:.55em .7em;border-bottom:1px solid var(--aobo-border);text-align:center;\n    vertical-align:middle;white-space:nowrap;}\n  .ts-table tbody tr:nth-child(even){background:var(--aobo-stripe);}\n  .ts-table tbody tr:hover{background:var(--aobo-hover);}\n  .ts-table tbody tr.ts-group td{background:#e8ecf1;font-weight:700;font-size:.78em;letter-spacing:.05em;\n    text-transform:uppercase;color:#3c4043;padding:.55em .7em;border-bottom:1px solid var(--aobo-border);\n    text-align:left;}\n  .ts-table tbody tr:not(.ts-group).ts-hide{display:none;}\n  td.ts-grade{font-weight:700;font-size:.95em;text-align:left;white-space:nowrap;color:var(--aobo-text);}\n  .ts-meter{display:inline-flex;align-items:center;gap:7px;}\n  .ts-meter i{display:inline-block;width:44px;height:6px;border-radius:3px;background:var(--aobo-fill);overflow:hidden;}\n  .ts-meter i b{display:block;height:100%;border-radius:3px;background:linear-gradient(90deg,#4d94ff,var(--aobo-accent));}\n  .ts-meter span{font-size:.9em;font-weight:600;min-width:14px;}\n  .ts-hr{font-variant-numeric:tabular-nums;font-weight:500;}\n  .ts-num{font-variant-numeric:tabular-nums;}\n  .ts-sup{font-size:9px;color:var(--aobo-accent);vertical-align:super;line-height:0;}\n\n  \/* Footnotes *\/\n  .ts-notes-list{margin:1.2em 0 0;background:#fff;border:1px solid var(--aobo-border);\n    border-left:3px solid var(--aobo-accent);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;\n    padding:1em 1.2em 1em 2.2em;font-size:.82em;color:var(--aobo-muted);line-height:1.7;}\n  .ts-notes-list li{margin-bottom:.3em;}\n  .ts-notes-list sup{color:var(--aobo-accent);font-size:10px;}\n\n  \/* Figure *\/\n  .ts-fig{margin:1.2em 0 0;background:#fff;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);padding:1em;}\n  .ts-fig img{display:block;width:100%;height:auto;border-radius:6px;}\n  .ts-fig figcaption{font-size:.8em;color:var(--aobo-muted);margin-top:.6em;line-height:1.6;}\n  .ts-fig figcaption b{color:var(--aobo-text);}\n\n  \/* Info cards *\/\n  .ts-grid{display:grid;grid-template-columns:repeat(auto-fit,minmax(250px,1fr));gap:14px;margin-top:1.2em;}\n  .ts-grid .ts-card{background:#fff;border:1px solid var(--aobo-border);border-left:3px solid var(--aobo-accent);\n    border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;}\n  .ts-grid h2{font-size:1em;margin:0 0 .4em;color:var(--aobo-text);}\n  .ts-grid p{font-size:.82em;color:var(--aobo-muted);margin:0;line-height:1.7;}\n  .ts-grid p b{color:var(--aobo-text);font-weight:600;}\n\n  \/* Disclaimer *\/\n  .ts-disclaimer{margin-top:1.2em;background:#fff;border:1px solid var(--aobo-border);\n    border-left:3px solid var(--aobo-accent);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;\n    padding:1em 1.2em;}\n  .ts-disclaimer h3{margin:0 0 .5em;font-size:.95em;color:var(--aobo-text);display:flex;align-items:center;gap:6px;}\n  .ts-disclaimer h3::before{content:\"\\2139\";font-size:1em;color:var(--aobo-accent);}\n  .ts-disclaimer p{margin:0 0 .5em;max-width:none;color:var(--aobo-muted);line-height:1.7;}\n  .ts-disclaimer p:last-child{margin-bottom:0;}\n\n  \/* Empty \/ source *\/\n  .ts-empty{display:none;text-align:center;color:var(--aobo-muted);padding:2em 1em;font-size:.9em;}\n  .ts-empty.show{display:block;}\n  .ts-source{margin-top:.8em;color:var(--aobo-muted);font-size:.82em;line-height:1.58;}\n\n  @media (max-width:860px){\n    .ts-hero-top,.ts-tool-area{padding:1em;}\n    .ts-controls{flex-direction:column;align-items:stretch;}\n    .ts-search{max-width:none;}\n    .ts-count{margin-left:0;}\n    .ts-hero h1{font-size:1.5rem;}\n  }\n  @media (max-width:520px){\n    .ts-hero-top,.ts-tool-area{padding:.8em;}\n    table.ts-table{font-size:.82em;}\n    .ts-table thead th,.ts-table tbody td{padding:.4em .4em;}\n  }  table.ts-table thead th{cursor:default;}\n  table.ts-table td.ts-grade{font-weight:700;}\n  table.ts-table td.ts-type{white-space:normal;text-align:left;font-size:.92em;color:#555;min-width:150px;}\n  table.ts-table td.ts-long{white-space:normal;text-align:left;vertical-align:top;font-size:.92em;color:#444;\n    min-width:260px;line-height:1.55;}\n  table.ts-table td.ts-safe{white-space:normal;text-align:left;vertical-align:top;}\n  table.ts-table tbody tr:hover{background:var(--aobo-hover);}\n  table.ts-table tbody tr.ts-group:hover td{background:#e8ecf1;}\n  .ts-sec{margin:1.8em 0 .5em;font-size:1.02em;color:var(--aobo-text);font-weight:700;}\n  .ts-sec span{display:block;font-size:.8em;font-weight:400;color:var(--aobo-muted);margin-top:.15em;line-height:1.6;}\n  .ts-table-wrap{margin-top:.6em;}\n  .ts-tcap{margin:.5em 0 0;font-size:.78em;color:var(--aobo-muted);line-height:1.6;}\n  .ts-props a{color:var(--aobo-blue) !important;text-decoration:none !important;}\n  .ts-props a:hover{text-decoration:underline !important;}\n  .ts-rel{margin-top:1.2em;background:#fff;border:1px solid var(--aobo-border);\n    border-left:3px solid var(--aobo-blue);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;}\n  .ts-rel h3{margin:0 0 .5em;font-size:.95em;color:var(--aobo-text);}\n  .ts-rel p{margin:0;font-size:.85em;line-height:1.9;color:var(--aobo-muted);}\n  .ts-rel p a{font-weight:600;}  \/* Page-scoped typography: keep heading semantics but match the reference look.\n     The H1 is intentionally NOT font-overridden: on the live site Astra owns h1 and\n     every recent reference page renders it the same way (32px, centred). *\/\n  .aobo-ht-ref h2.ts-h2{margin:1.9em 0 .55em !important;font-size:1.02em !important;font-weight:700 !important;\n    line-height:1.5 !important;color:var(--aobo-text) !important;letter-spacing:normal !important;\n    font-family:inherit !important;}\n  .aobo-ht-ref h3.ts-h3{margin:1.5em 0 .45em !important;font-size:.95em !important;font-weight:700 !important;\n    line-height:1.5 !important;color:#3c4043 !important;letter-spacing:normal !important;font-family:inherit !important;}\n  .aobo-ht-ref p.ts-p{margin:0 0 .95em;font-size:.92em;line-height:1.8;color:#444;}\n  .aobo-ht-ref p.ts-p:last-child{margin-bottom:0;}\n  .aobo-ht-ref .ts-p a{font-weight:600;}\n  .aobo-ht-ref table.ts-table td.ts-num{font-variant-numeric:tabular-nums;font-weight:500;}\n  .aobo-ht-ref table.ts-table td.ts-grade{font-weight:700;}\n  .aobo-ht-ref table.ts-table td.ts-swcell{text-align:center;line-height:1;}\n  .aobo-ht-ref .ts-sw{display:inline-block;width:56px;height:28px;border-radius:4px;border:1px solid var(--aobo-border-dark);\n    vertical-align:middle;}\n  .aobo-ht-ref .ts-faq{margin-top:1.3em;display:grid;gap:12px;}\n  .aobo-ht-ref .ts-faq .qa{background:#fff;border:1px solid var(--aobo-border);border-left:3px solid var(--aobo-accent);\n    border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;}\n  .aobo-ht-ref .ts-faq .qa h3{margin:0 0 .45em !important;font-size:.95em !important;font-weight:700 !important;\n    color:var(--aobo-text) !important;line-height:1.5 !important;font-family:inherit !important;}\n  .aobo-ht-ref .ts-faq .qa p{margin:0;font-size:.88em;line-height:1.75;color:#555;}\n\n\/* compact second line inside a table header cell (unit or sub-label) *\/\n.ts-props th .ts-thsi{display:block;font-weight:400;font-size:.72em;opacity:.7;margin-top:.12em;letter-spacing:0;line-height:1.25;}\n.ts-props table.ts-table.ts-table{width:auto;max-width:100%;}\n.ts-props .ts-table-wrap{overflow-x:auto;-webkit-overflow-scrolling:touch;}\n<\/style>\n<style id=\"aobo-ds\">\n.entry-content[class]{--ds-font-body: Lora,serif;--ds-font-head: Lato,sans-serif;--ds-blue: #0c56d0;--ds-blue-deep: #082d6f;--ds-blue-dark: #073b91;--ds-blue-soft: #eaf2ff;--ds-blue-pale: #f7fbff;--ds-border: #d7e5fb;--ds-border-soft: #e8eef8;--ds-text: #203044;--ds-muted: #617087;--ds-orange: #f59b23;--ds-shadow: 0 18px 45px rgba(12,86,208,0.10);--ds-shadow-sm: 0 12px 32px rgba(12,86,208,0.07);font-family: var(--ds-font-body);line-height: 1.7;-webkit-text-size-adjust: 100%;box-sizing: border-box}.entry-content[class] *,.entry-content[class] *::before,.entry-content[class] *::after{box-sizing: border-box}.entry-content[class] h1{font-family: var(--ds-font-head) !important;font-size: clamp(24px,4vw,min(50px,var(--h1-max,50px))) !important;line-height: 1.08 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 0 0 16px !important}.entry-content[class] h2{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 44px 0 16px !important}.entry-content[class] h3{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.3 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 30px 0 12px !important}.entry-content[class] h4{font-family: var(--ds-font-head) !important;font-size: 19px !important;line-height: 1.35 !important;letter-spacing: 0 !important;font-weight: 700 !important;margin: 24px 0 10px !important}.entry-content[class] p,.entry-content[class] li,.entry-content[class] dd,.entry-content[class] dt{font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important}.entry-content[class] figcaption,.entry-content[class] small,.entry-content[class] .aobo-figure figcaption{font-size: 15px !important;line-height: 1.6 !important}.entry-content[class] table{width: 100%;border-collapse: collapse;background: #ffffff}.entry-content[class] table th,.entry-content[class] table thead th,.entry-content[class] table thead td{background: var(--ds-blue-soft) !important;color: var(--ds-blue-deep) !important;font-family: var(--ds-font-head) !important;font-size: 15px !important;font-weight: 700 !important;line-height: 1.45 !important;text-align: center !important;text-transform: none !important;letter-spacing: 0 !important;padding: 14px 16px !important;border: 0 !important;border-bottom: 1px solid var(--ds-border) !important;vertical-align: top !important;position: static !important}.entry-content[class] table td{font-family: var(--ds-font-body) !important;font-size: 15px !important;line-height: 1.55 !important;padding: 14px 16px !important;border: 0;border-bottom: 1px solid var(--ds-border-soft) !important;vertical-align: top !important;white-space: normal !important;text-align: center !important}.entry-content[class] table tbody tr:last-child td{border-bottom: 0 !important}.entry-content[class] table th.ds-text,.entry-content[class] table td.ds-text{text-align: left !important}.entry-content[class] table tbody tr:nth-child(even){background: #fafcff !important}.entry-content[class] table tbody tr:hover{background: #f2f7ff !important}.entry-content[class] table tbody td:first-child{color: var(--ds-blue-deep);font-weight: 700}.entry-content[class] .aobo-table-wrap,.entry-content[class] .ts-table-wrap{overflow-x: auto;margin: 22px 0 28px;border: 1px solid var(--ds-border);border-radius: 18px;box-shadow: var(--ds-shadow-sm);background: #ffffff}.entry-content[class] h1,.entry-content[class] h2,.entry-content[class] h3,.entry-content[class] h4{color: var(--ds-blue-deep)}.entry-content[class] p,.entry-content[class] li{color: var(--ds-text)}.entry-content[class] a{color: var(--ds-blue);font-weight: 700;text-decoration: none}.entry-content[class] a:hover,.entry-content[class] a:focus{color: var(--ds-orange)}.entry-content[class] .aobo-final-cta h1,.entry-content[class] .aobo-final-cta h2,.entry-content[class] .aobo-final-cta h3,.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-cta h1,.entry-content[class] .aobo-cta h2,.entry-content[class] .aobo-cta h3,.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-cta-buttons,.entry-content[class] .aobo-cta-buttons *,.entry-content[class] .aobo-esr .stat-band h2,.entry-content[class] .aobo-esr .stat-band h3,.entry-content[class] .aobo-esr .stat-band p,.entry-content[class] .aobo-esr .closing h2,.entry-content[class] .aobo-esr .closing h3,.entry-content[class] .aobo-esr .closing p,.entry-content[class] .footcta h2,.entry-content[class] .footcta h3,.entry-content[class] .footcta p,.entry-content[class] .bg-dark h2,.entry-content[class] .bg-dark h3,.entry-content[class] .bg-dark p,.entry-content[class] .ht-header h2,.entry-content[class] .ht-header h3,.entry-content[class] .ts-cta h2,.entry-content[class] .ts-cta h3,.entry-content[class] .aobo-sup .stats h2,.entry-content[class] .aobo-sup .stats h3,.entry-content[class] .aobo-sup .stats p,.entry-content[class] .aobo-sup .cta h2,.entry-content[class] .aobo-sup .cta h3,.entry-content[class] .aobo-sup .cta p{color: inherit}.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-sup .cta p{color: rgba(255,255,255,0.92)}.entry-content[class] .has-ast-global-color-0-background-color,.entry-content[class] .has-ast-global-color-0-background-color *,.entry-content[class] .contact-container,.entry-content[class] .contact-container *{color: #ffffff !important}.entry-content[class] .has-ast-global-color-0-background-color .label-text,.entry-content[class] .has-ast-global-color-0-background-color .label-text *,.entry-content[class] .contact-container .label-text{color: rgba(255,255,255,0.72) !important}.entry-content[class] .aobo-cta h1,.entry-content[class] .aobo-cta h2,.entry-content[class] .aobo-cta h3,.entry-content[class] .aobo-cta h4,.entry-content[class] .cta h1,.entry-content[class] .cta h2,.entry-content[class] .cta h3,.entry-content[class] .cta h4,.entry-content[class] .aobo-final-cta h1,.entry-content[class] .aobo-final-cta h2,.entry-content[class] .aobo-final-cta h3,.entry-content[class] .aobo-final-cta h4{color: #ffffff !important}.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-cta li,.entry-content[class] .cta p,.entry-content[class] .cta li,.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-final-cta li{color: rgba(255,255,255,0.93) !important}.entry-content[class] .aobo-cta p a,.entry-content[class] .aobo-cta li a,.entry-content[class] .cta p a,.entry-content[class] .cta li a,.entry-content[class] .aobo-final-cta p a,.entry-content[class] .aobo-final-cta li a{color: #ffffff !important;text-decoration: underline}.entry-content[class] .aobo-btn-inquiry{color: #ffffff !important}.entry-content[class] .aobo-cta .aobo-btn-inquiry,.entry-content[class] .aobo-final-cta .aobo-btn-inquiry{color: var(--ds-blue) !important}.entry-content[class] .aobo-wrap,.entry-content[class] .aobo-article{max-width: 1180px;margin: 0 auto;padding: 0}.entry-content[class] img{max-width: 100%;height: auto}.entry-content[class] figure{margin: 26px auto 34px;max-width: 860px}.entry-content[class] figure img{display: block;width: 100%;border: 1px solid var(--ds-border);border-radius: 18px;box-shadow: var(--ds-shadow-sm);background: #ffffff}.entry-content[class] .aobo-hero{background: linear-gradient(135deg,#ffffff 0%,#f7fbff 56%,#eaf2ff 100%);border: 1px solid var(--ds-border);border-radius: 28px;padding: 42px 38px;margin-bottom: 24px;box-shadow: var(--ds-shadow);overflow: hidden;position: relative}.entry-content[class] .aobo-hero::after{content: \"\";position: absolute;right: -90px;top: -90px;width: 260px;height: 260px;border-radius: 50%;background: rgba(12,86,208,0.08)}.entry-content[class] .aobo-hero h1,.entry-content[class] .aobo-hero p{position: relative;z-index: 2}.entry-content[class] .aobo-note-box{margin: 34px 0;padding: 22px 24px;border: 1px solid var(--ds-border);border-left: 5px solid var(--ds-orange);border-radius: 16px;background: #fbfdff}.entry-content[class] .aobo-note-box p{margin: 0 0 14px;color: var(--ds-muted) !important;font-style: italic}.entry-content[class] .aobo-note-box p:last-child{margin-bottom: 0}.entry-content[class] .aobo-btn{display: inline-flex;align-items: center;justify-content: center;min-height: 42px;padding: 10px 16px;border-radius: 999px;text-align: center;text-decoration: none;font-family: var(--ds-font-head) !important;font-weight: 700;font-size: 14px !important;line-height: 1.2;transition: all 0.2s ease;cursor: pointer;white-space: nowrap}.entry-content[class] .aobo-btn-primary{background: var(--ds-blue);border: 1px solid var(--ds-blue);color: #ffffff !important}.entry-content[class] .aobo-btn-secondary{background: #ffffff;border: 1px solid var(--ds-border);color: var(--ds-blue) !important}.entry-content[class] .aobo-btn:hover{transform: translateY(-1px)}.entry-content[class] .aobo-supply-actions{display: flex;flex-wrap: wrap;gap: 12px;margin-top: 18px}.entry-content[class] .aobo-supply-actions .aobo-btn{min-width: 190px}.entry-content[class] .aobo-final-cta{margin-top: 34px;padding: 34px;border-radius: 28px;background: linear-gradient(135deg,#073b91 0%,#0c56d0 100%);box-shadow: 0 18px 45px rgba(12,86,208,0.20);display: flex;align-items: center;justify-content: space-between;gap: 20px;flex-wrap: wrap}.entry-content[class] .aobo-final-cta h2{margin: 0 0 12px !important;font-size: 26px !important;color: #ffffff !important}.entry-content[class] .aobo-final-cta p{margin: 0}.entry-content[class] .aobo-final-cta .aobo-btn-primary{background: #ffffff;border-color: #ffffff;color: var(--ds-blue) !important}.entry-content[class] .aobo-final-cta .aobo-btn-secondary{background: transparent;border-color: rgba(255,255,255,0.75);color: #ffffff !important}.entry-content[class] .ts-hero{background: transparent !important;border: 0 !important;border-radius: 0 !important;box-shadow: none !important}.entry-content[class] .ts-hero-top{background: linear-gradient(135deg,#ffffff 0%,#f7fbff 56%,#eaf2ff 100%) !important;border: 1px solid var(--ds-border) !important;border-radius: 28px !important;padding: 42px 38px !important;margin: 0 0 24px !important;box-shadow: var(--ds-shadow) !important;position: relative;overflow: hidden;text-align: left !important}.entry-content[class] .ts-hero-top h1,.entry-content[class] .ts-hero-top p,.entry-content[class] .ts-hero h1{text-align: left !important}.entry-content[class] .ts-hero-top p{max-width: none !important;margin: 0 0 12px !important}.entry-content[class] .ts-tool-area{padding: 0 !important}.entry-content[class] .ts-sec{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 44px 0 16px !important}.entry-content[class] .ts-sec > span{display: block !important;font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important;font-weight: 400 !important;color: var(--ds-text) !important;margin: 0 0 16px !important}.entry-content[class] .ts-kicker{display: inline-flex !important;align-items: center;gap: 7px;margin: 0 0 14px !important;padding: 6px 14px !important;border: 1px solid var(--ds-border) !important;border-radius: 999px !important;background: #ffffff !important;color: var(--ds-blue) !important;font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important;letter-spacing: 0 !important;text-transform: none !important}.entry-content[class] .ts-p,.entry-content[class] .card-desc,.entry-content[class] .aobo-strip-intro,.entry-content[class] .schema-faq-answer{font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important;font-weight: 400 !important}.entry-content[class] .lead,.entry-content[class] .fund-lead{font-family: var(--ds-font-body) !important;font-size: 19px !important;line-height: 1.65 !important;font-weight: 400 !important}.entry-content[class] .ts-h2{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 44px 0 16px !important}.entry-content[class] .ts-h3{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.3 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 30px 0 12px !important}.entry-content[class] .card-grade{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.25 !important;font-weight: 700 !important}.entry-content[class] .schema-faq-question{font-family: var(--ds-font-head) !important;font-size: 19px !important;line-height: 1.4 !important;font-weight: 700 !important;color: var(--ds-blue-deep) !important}.entry-content[class] .ts-source,.entry-content[class] .ts-hint,.entry-content[class] .ts-placeholder,.entry-content[class] .ht-spec-label,.entry-content[class] .ht-spec-value,.entry-content[class] .ht-step-indicator,.entry-content[class] .ht-badge,.entry-content[class] .idx,.entry-content[class] .xlink,.entry-content[class] .cat-note,.entry-content[class] .aobo-card-note,.entry-content[class] .card-desig,.entry-content[class] .k,.entry-content[class] .v,.entry-content[class] .note,.entry-content[class] .aobo-note{font-family: var(--ds-font-head) !important;font-size: 15px !important;line-height: 1.6 !important;font-weight: 400 !important}.entry-content[class] .ht-spec-label,.entry-content[class] .idx,.entry-content[class] .k{font-weight: 700 !important}.entry-content[class] .aobo-note,.entry-content[class] .note{font-family: var(--ds-font-body) !important;color: var(--ds-muted) !important}.entry-content[class] .chip{font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important}.entry-content[class] .kicker,.entry-content[class] .eyebrow,.entry-content[class] .aobo-eyebrow{display: inline-flex !important;align-items: center;gap: 7px;margin: 0 0 14px !important;padding: 6px 14px !important;border: 1px solid var(--ds-border) !important;border-radius: 999px !important;background: #ffffff !important;color: var(--ds-blue) !important;font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important;letter-spacing: 0 !important;text-transform: none !important}@media (max-width: 760px){.entry-content[class] h1{font-size: clamp(22px,6.4vw,min(34px,var(--h1-max,34px))) !important}.entry-content[class] h2{font-size: 25px !important}.entry-content[class] h3{font-size: 20px !important}.entry-content[class] h4{font-size: 17px !important}.entry-content[class] p,.entry-content[class] li{font-size: 16px !important}.entry-content[class] table th,.entry-content[class] table td{font-size: 14px !important;padding: 11px 12px !important}.entry-content[class] .aobo-hero{padding: 30px 22px}.entry-content[class] .aobo-final-cta{padding: 26px 22px}.entry-content[class] .aobo-final-cta .aobo-btn{width: 100%}}\n<\/style>\n\n<section class=\"aobo-ht-ref ts-props\">\n  <div class=\"aobo-wrap\">\n      <div class=\"ts-hero\">\n        <div class=\"ts-hero-top\">\n          <div class=\"ts-kicker\"><span><\/span>Abrasive Wear Data<\/div>\n          <h1 style=\"--h1-max:52px\">Tool Steel Abrasive Wear Test Data<\/h1>\n          <p>Wear resistance is quoted as a ranking rather than a single number. This page collects the measured abrasive wear data that four standard wear tests produced for D2 tool steel and the reference ferrous alloys they are run against, together with the test conditions behind every value.<\/p>\n        <\/div>\n        <div class=\"ts-tool-area\">\n        <h2 class=\"ts-h2\">How the four tests differ<\/h2>\n        <p class=\"ts-p\">The pin on drum test (ASTM G 132) drags a pin across abrasive cloth under a fixed load and reports a relative wear factor against a reference pin. A lower factor means less material lost, and the load, the sliding distance and the abrasive all have to be stated with the result.<\/p>\n        <p class=\"ts-p\">The dry sand rubber wheel test (ASTM G 65) presses a flat specimen against a rubber wheel while sand flows between them. It reproduces low stress three body wear, the mode behind wear on tillage tools, pivot pins and wire ropes.<\/p>\n        <p class=\"ts-p\">The jaw crusher test (ASTM G 81) crushes ore between two plates and reports the volume of material lost for every kilogram of ore crushed. It is a high stress gouging test, and the abrasive can be matched to the ore the tool actually meets.<\/p>\n        <p class=\"ts-p\">The impeller in drum test throws abrasive against paddle specimens and combines abrasion with impact. Of the four it sits closest to crusher hammer, blow bar and mill liner service.<\/p>\n        <p class=\"ts-p\">Hardness dominates the low stress tests, so a harder alloy usually loses less volume. On hard alloys the ranking can change with the abrasive itself, because the abrasive and the carbides in the steel are then of comparable hardness. That is why a tool steel is judged on more than one of these tests.<\/p>\n        <h2 class=\"ts-h2\">Pin on drum abrasive wear data<\/h2>\n        <p class=\"ts-p\">Load 66.7 N (15 lbf), pin diameter 6.35 mm (0.25 in.). The relative wear factor is normalised against a reference pin run under the same conditions.<\/p>\n        <div class=\"ts-table-wrap\" style=\"width:fit-content;max-width:100%\"><table class=\"ts-table\" style=\"width:auto;max-width:100%;min-width:375px\">\n          <thead>\n            <tr><th>Alloy<\/th><th>Hardness, HB<\/th><th>Relative wear factor<br><span class=\"ts-thsi\">WF<\/span><\/th><th>Volume wear, mm3\/m<\/th><\/tr>\n          <\/thead>\n          <tbody>\n            <tr><td class=\"ts-grade\">Stainless steel, type 304<\/td><td class=\"ts-num\">207<\/td><td class=\"ts-num\">0.73<\/td><td class=\"ts-num\">0.86<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, ASTM A 514<\/td><td class=\"ts-num\">256<\/td><td class=\"ts-num\">0.98<\/td><td class=\"ts-num\">1.11<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, AISI 4340<\/td><td class=\"ts-num\">540<\/td><td class=\"ts-num\">0.73<\/td><td class=\"ts-num\">0.95<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Tool steel, type D2<\/td><td class=\"ts-num\">698<\/td><td class=\"ts-num\">0.42<\/td><td class=\"ts-num\">0.49<\/td><\/tr>\n            <tr><td class=\"ts-grade\">High chromium white cast iron<\/td><td class=\"ts-num\">661<\/td><td class=\"ts-num\">0.27<\/td><td class=\"ts-num\">0.31<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Carbon steel, AISI 1060<\/td><td class=\"ts-num\">785<\/td><td class=\"ts-num\">0.50<\/td><td class=\"ts-num\">0.56<\/td><\/tr>\n          <\/tbody>\n        <\/table><\/div>\n        <p class=\"ts-tcap\"><em>Source: ASM Handbook, Vol. 8, typical pin on drum wear data for ferrous alloys.<\/em><\/p>\n        <h2 class=\"ts-h2\">Dry sand rubber wheel abrasive wear data<\/h2>\n        <p class=\"ts-p\">Volume loss in cubic millimetres after testing under procedure A or procedure B. Procedure B is the condition used for most ferrous materials.<\/p>\n        <div class=\"ts-table-wrap\" style=\"width:fit-content;max-width:100%\"><table class=\"ts-table\" style=\"width:auto;max-width:100%;min-width:375px\">\n          <thead>\n            <tr><th>Alloy<\/th><th>Hardness, HV<\/th><th>Volume loss, mm3<br><span class=\"ts-thsi\">procedure A<\/span><\/th><th>Volume loss, mm3<br><span class=\"ts-thsi\">procedure B<\/span><\/th><\/tr>\n          <\/thead>\n          <tbody>\n            <tr><td class=\"ts-grade\">Stainless steel, type 304<\/td><td class=\"ts-num\">207<\/td><td class=\"ts-num\">408.0<\/td><td class=\"ts-num\">170.8<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, ASTM A 514<\/td><td class=\"ts-num\">256<\/td><td class=\"ts-num\">&hellip;<\/td><td class=\"ts-num\">134.1<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, AISI 4340<\/td><td class=\"ts-num\">540<\/td><td class=\"ts-num\">&hellip;<\/td><td class=\"ts-num\">74.0<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Tool steel, type D2<\/td><td class=\"ts-num\">689<\/td><td class=\"ts-num\">45.3<\/td><td class=\"ts-num\">14.6<\/td><\/tr>\n            <tr><td class=\"ts-grade\">High chromium white cast iron<\/td><td class=\"ts-num\">661<\/td><td class=\"ts-num\">31.5<\/td><td class=\"ts-num\">12.7<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Carbon steel, AISI 1060<\/td><td class=\"ts-num\">785<\/td><td class=\"ts-num\">&hellip;<\/td><td class=\"ts-num\">32.1<\/td><\/tr>\n          <\/tbody>\n        <\/table><\/div>\n        <p class=\"ts-tcap\"><em>Source: ASM Handbook, Vol. 8, typical dry sand rubber wheel abrasive wear data. A test is valid when the coefficient of variation between runs stays under 7 percent.<\/em><\/p>\n        <h3 class=\"ts-h3\">Standard conditions for the dry sand rubber wheel test<\/h3>\n        <div class=\"ts-table-wrap\" style=\"width:fit-content;max-width:100%\"><table class=\"ts-table\" style=\"width:auto;max-width:100%;min-width:470px\">\n          <thead>\n            <tr><th>ASTM procedure<\/th><th>Force<br><span class=\"ts-thsi\">N<\/span><\/th><th>Force<br><span class=\"ts-thsi\">lbf<\/span><\/th><th>Wheel<br><span class=\"ts-thsi\">revolutions<\/span><\/th><th>Distance abraded<br><span class=\"ts-thsi\">m<\/span><\/th><\/tr>\n          <\/thead>\n          <tbody>\n            <tr><td class=\"ts-grade\">A<\/td><td class=\"ts-num\">130<\/td><td class=\"ts-num\">29<\/td><td class=\"ts-num\">6,000<\/td><td class=\"ts-num\">4,309<\/td><\/tr>\n            <tr><td class=\"ts-grade\">B<\/td><td class=\"ts-num\">130<\/td><td class=\"ts-num\">29<\/td><td class=\"ts-num\">2,000<\/td><td class=\"ts-num\">1,436<\/td><\/tr>\n            <tr><td class=\"ts-grade\">C<\/td><td class=\"ts-num\">130<\/td><td class=\"ts-num\">29<\/td><td class=\"ts-num\">100<\/td><td class=\"ts-num\">71.8<\/td><\/tr>\n            <tr><td class=\"ts-grade\">D<\/td><td class=\"ts-num\">45<\/td><td class=\"ts-num\">10<\/td><td class=\"ts-num\">6,000<\/td><td class=\"ts-num\">4,309<\/td><\/tr>\n            <tr><td class=\"ts-grade\">E<\/td><td class=\"ts-num\">130<\/td><td class=\"ts-num\">29<\/td><td class=\"ts-num\">1,000<\/td><td class=\"ts-num\">718<\/td><\/tr>\n          <\/tbody>\n        <\/table><\/div>\n        <p class=\"ts-tcap\"><em>Source: ASM Handbook, Vol. 8. Results from different procedures are not directly comparable, so the procedure letter belongs with the number.<\/em><\/p>\n        <h2 class=\"ts-h2\">Jaw crusher abrasive wear data<\/h2>\n        <p class=\"ts-p\">Volume loss in cubic millimetres for every kilogram of high silica quartzite crushed. The spread follows each value and comes from twenty hardness readings across the two wear faces of a specimen pair.<\/p>\n        <div class=\"ts-table-wrap\" style=\"width:fit-content;max-width:100%\"><table class=\"ts-table\" style=\"width:auto;max-width:100%;min-width:280px\">\n          <thead>\n            <tr><th>Alloy<\/th><th>Hardness, HV<\/th><th>Volume loss, mm3<br><span class=\"ts-thsi\">per kg of quartzite<\/span><\/th><\/tr>\n          <\/thead>\n          <tbody>\n            <tr><td class=\"ts-grade\">Stainless steel, type 304<\/td><td class=\"ts-num\">207<\/td><td class=\"ts-num\">27.7 &plusmn; 4.9<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Austenitic steel, 13% Mn<\/td><td class=\"ts-num\">230<\/td><td class=\"ts-num\">13.2 &plusmn; 2.1<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, ASTM A 514<\/td><td class=\"ts-num\">256<\/td><td class=\"ts-num\">23.9 &plusmn; 3.3<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, AISI 4340<\/td><td class=\"ts-num\">540<\/td><td class=\"ts-num\">13.8 &plusmn; 1.4<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Tool steel, type D2<\/td><td class=\"ts-num\">698<\/td><td class=\"ts-num\">15.9 &plusmn; 2.5<\/td><\/tr>\n            <tr><td class=\"ts-grade\">High chromium white cast iron<\/td><td class=\"ts-num\">661<\/td><td class=\"ts-num\">15.6 &plusmn; 2.2<\/td><\/tr>\n          <\/tbody>\n        <\/table><\/div>\n        <p class=\"ts-tcap\"><em>Source: ASM Handbook, Vol. 8, typical jaw crusher wear data for ferrous alloys.<\/em><\/p>\n        <h2 class=\"ts-h2\">Impact abrasion wear data, impeller in drum<\/h2>\n        <p class=\"ts-p\">Wear rate in cubic millimetres per hour for a one hour test and for the steady state reached after five hours, against high silica quartzite.<\/p>\n        <div class=\"ts-table-wrap\" style=\"width:fit-content;max-width:100%\"><table class=\"ts-table\" style=\"width:auto;max-width:100%;min-width:470px\">\n          <thead>\n            <tr><th>Alloy<\/th><th>Hardness, HV<\/th><th>1 h test<br><span class=\"ts-thsi\">mm3\/h<\/span><\/th><th>5 h test<br><span class=\"ts-thsi\">mm3\/h<\/span><\/th><th>Difference vs 1 h rate<br><span class=\"ts-thsi\">%<\/span><\/th><\/tr>\n          <\/thead>\n          <tbody>\n            <tr><td class=\"ts-grade\">304 stainless steel<\/td><td class=\"ts-num\">207<\/td><td class=\"ts-num\">112.2<\/td><td class=\"ts-num\">102.3<\/td><td class=\"ts-num\">-8.8<\/td><\/tr>\n            <tr><td class=\"ts-grade\">12% Mn steel<\/td><td class=\"ts-num\">230<\/td><td class=\"ts-num\">84.2<\/td><td class=\"ts-num\">69.7<\/td><td class=\"ts-num\">-17.2<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, ASTM A 514<\/td><td class=\"ts-num\">256<\/td><td class=\"ts-num\">101.3<\/td><td class=\"ts-num\">96.7<\/td><td class=\"ts-num\">-4.5<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, AISI 4340<\/td><td class=\"ts-num\">540<\/td><td class=\"ts-num\">96.2<\/td><td class=\"ts-num\">76.6<\/td><td class=\"ts-num\">-20.4<\/td><\/tr>\n            <tr><td class=\"ts-grade\">Low alloy steel, REM 500<\/td><td class=\"ts-num\">505<\/td><td class=\"ts-num\">93.7<\/td><td class=\"ts-num\">81.0<\/td><td class=\"ts-num\">-13.6<\/td><\/tr>\n            <tr><td class=\"ts-grade\">D2 tool steel<\/td><td class=\"ts-num\">698<\/td><td class=\"ts-num\">70.2<\/td><td class=\"ts-num\">57.0<\/td><td class=\"ts-num\">-18.8<\/td><\/tr>\n            <tr><td class=\"ts-grade\">High chromium white cast iron<\/td><td class=\"ts-num\">661<\/td><td class=\"ts-num\">69.1<\/td><td class=\"ts-num\">58.0<\/td><td class=\"ts-num\">-16.1<\/td><\/tr>\n          <\/tbody>\n        <\/table><\/div>\n        <p class=\"ts-tcap\"><em>Source: ASM Handbook, Vol. 8, typical impeller tumbler wear data for ferrous alloys. The first hour is a break in period, so every alloy in the set wears faster in the one hour test than it does at steady state.<\/em><\/p>\n        <h2 class=\"ts-h2\">What the D2 values show in each test<\/h2>\n  <\/div>\n<\/section>\n\n\n<section class=\"aobo-ht-ref ts-props\">\n  <div class=\"aobo-wrap\">\n\n        <p class=\"ts-p\">D2 tool steel appears in all four data sets, which makes it the common reference across the wear modes. In the pin on drum test it returns a relative wear factor of 0.42 against 0.98 for ASTM A 514 and 0.73 for AISI 4340. In the dry sand rubber wheel test the same alloy loses 14.6 mm3 under procedure B against 74.0 mm3 for AISI 4340 and 32.1 mm3 for AISI 1060.<\/p>\n        <p class=\"ts-p\">The jaw crusher result does not follow the low stress ranking. D2 loses 15.9 mm3 per kilogram of quartzite against 13.8 mm3 for the softer AISI 4340, which shows that a gouging contact at high stress is a different selection problem from sliding abrasion, and a grade chosen on the dry sand ranking alone can come up short in a crusher.<\/p>\n        <p class=\"ts-p\">In the impeller in drum test D2 returns 70.2 mm3\/h in the first hour and 57.0 mm3\/h at steady state, close to the high chromium white cast iron at 69.1 and 58.0. Here the carbides that carry wear resistance are doing the same work in both materials.<\/p>\n        <p class=\"ts-p\">The high chromium white cast iron is the best performer in three of the four sets, and it is not a wrought tool steel. It is included because it is the material wear studies measure against, and it defines the lower bound of the scale.<\/p>\n        <h2 class=\"ts-h2\">Before quoting these numbers<\/h2>\n        <p class=\"ts-p\">The values come from laboratory tests on specific alloys in a specific heat treated condition. Abrasive type, abrasive size, load and sliding distance decide the ranking, and a change of abrasive can reorder two hard alloys. Where a wear rate decides a grade for a customer, run the test with the abrasive that matches the application.<\/p>\n        <p class=\"ts-p\">A wear test ranks materials. A grade that loses half the volume of another in the dry sand rubber wheel test does not last twice as long in service, because that test exaggerates the difference between grades. Field hardness and particle size of the abrasive affect the absolute values far more than they affect the ranking.<\/p>\n        <p class=\"ts-p\">Related reference pages on this site: <a href=\"https:\/\/aobosteel.com\/abrasive-wear-resistant-tool-steels\/\">Abrasive wear resistant tool steels<\/a>, <a href=\"https:\/\/aobosteel.com\/tool-steel-carbide-types-and-hardness\/\">Tool steel carbide types and hardness<\/a>, <a href=\"https:\/\/aobosteel.com\/d2-tool-steel\/\">D2 tool steel<\/a>, <a href=\"https:\/\/aobosteel.com\/impact-wear-and-spalling\/\">Impact wear and spalling of tooling<\/a>, <a href=\"https:\/\/aobosteel.com\/tool-steel-properties-chart\/\">Tool steel properties chart<\/a>, <a href=\"https:\/\/aobosteel.com\/tool-steel-supply\/\">Tool steel supply<\/a>.<\/p>\n        <p class=\"ts-tcap\"><em>Source: ASM Handbook, Volume 8, Mechanical Testing and Evaluation (ASM International), article Abrasive Wear Testing by Jeffrey A. Hawk, U.S. Department of Energy, Albany Research Center. Values are reproduced for comparison and reference only. Aobo Steel supplies tool steel in the annealed condition.<\/em><\/p>        <\/div>\n      <\/div>\n    <\/div>\n  <\/div>\n<\/section>\n\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-19283","page","type-page","status-publish","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v28.6 (Yoast SEO v28.6) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Tool Steel Abrasive Wear Test Data | Aobo Steel<\/title>\n<meta name=\"description\" content=\"Measured abrasive wear data for D2 tool steel and reference ferrous alloys from four standard tests, with hardness, relative wear factor and volume loss values.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/aobosteel.com\/ko\/tool-steel-abrasive-wear-test-data\/\" \/>\n<meta property=\"og:locale\" content=\"ko_KR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Tool Steel Abrasive Wear Test Data\" \/>\n<meta property=\"og:description\" content=\"Measured abrasive wear data for D2 tool steel and reference ferrous alloys from four standard tests, with hardness, relative wear factor and volume loss values.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/aobosteel.com\/ko\/tool-steel-abrasive-wear-test-data\/\" \/>\n<meta property=\"og:site_name\" content=\"AoboSteel\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61565368220197\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-18T23:43:43+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/\"},\"author\":{\"name\":\"Evan\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\"},\"headline\":\"Tool Steel Abrasive Wear Test Data\",\"datePublished\":\"2026-09-18T23:27:32+00:00\",\"dateModified\":\"2026-09-18T23:43:43+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/\"},\"wordCount\":6,\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"inLanguage\":\"ko-KR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/\",\"name\":\"Tool Steel Abrasive Wear Test Data | Aobo Steel\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\"},\"datePublished\":\"2026-09-18T23:27:32+00:00\",\"dateModified\":\"2026-09-18T23:43:43+00:00\",\"description\":\"Measured abrasive wear data for D2 tool steel and reference ferrous alloys from four standard tests, with hardness, relative wear factor and volume loss values.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/#breadcrumb\"},\"inLanguage\":\"ko-KR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/tool-steel-abrasive-wear-test-data\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/aobosteel.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Tool Steel Abrasive Wear Test Data\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"name\":\"AoboSteel\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/aobosteel.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ko-KR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\",\"name\":\"AoboSteel\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"contentUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"width\":1052,\"height\":592,\"caption\":\"AoboSteel\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\",\"name\":\"Evan\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ko-KR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"caption\":\"Evan\"},\"sameAs\":[\"http:\\\/\\\/www.aobosteel.com\",\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.instagram.com\\\/aobosteel\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\",\"https:\\\/\\\/x.com\\\/AobosteelEvan\",\"https:\\\/\\\/www.youtube.com\\\/@aobosteel\"],\"url\":\"https:\\\/\\\/aobosteel.com\\\/ko\\\/blog\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Tool Steel Abrasive Wear Test Data | Aobo Steel","description":"Measured abrasive wear data for D2 tool steel and reference ferrous alloys from four standard tests, with hardness, relative wear factor and volume loss values.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/aobosteel.com\/ko\/tool-steel-abrasive-wear-test-data\/","og_locale":"ko_KR","og_type":"article","og_title":"Tool Steel Abrasive Wear Test Data","og_description":"Measured abrasive wear data for D2 tool steel and reference ferrous alloys from four standard tests, with hardness, relative wear factor and volume loss values.","og_url":"https:\/\/aobosteel.com\/ko\/tool-steel-abrasive-wear-test-data\/","og_site_name":"AoboSteel","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61565368220197","article_modified_time":"2026-09-18T23:43:43+00:00","twitter_card":"summary_large_image","schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/#article","isPartOf":{"@id":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/"},"author":{"name":"Evan","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7"},"headline":"Tool Steel Abrasive Wear Test Data","datePublished":"2026-09-18T23:27:32+00:00","dateModified":"2026-09-18T23:43:43+00:00","mainEntityOfPage":{"@id":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/"},"wordCount":6,"publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"inLanguage":"ko-KR"},{"@type":"WebPage","@id":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/","url":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/","name":"Tool Steel Abrasive Wear Test Data | Aobo Steel","isPartOf":{"@id":"https:\/\/aobosteel.com\/#website"},"datePublished":"2026-09-18T23:27:32+00:00","dateModified":"2026-09-18T23:43:43+00:00","description":"Measured abrasive wear data for D2 tool steel and reference ferrous alloys from four standard tests, with hardness, relative wear factor and volume loss values.","breadcrumb":{"@id":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/#breadcrumb"},"inLanguage":"ko-KR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/aobosteel.com\/tool-steel-abrasive-wear-test-data\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/aobosteel.com\/"},{"@type":"ListItem","position":2,"name":"Tool Steel Abrasive Wear Test Data"}]},{"@type":"WebSite","@id":"https:\/\/aobosteel.com\/#website","url":"https:\/\/aobosteel.com\/","name":"\uc544\uc624\ubcf4\uc2a4\ud2f8","description":"","publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/aobosteel.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ko-KR"},{"@type":"Organization","@id":"https:\/\/aobosteel.com\/#organization","name":"\uc544\uc624\ubcf4\uc2a4\ud2f8","url":"https:\/\/aobosteel.com\/","logo":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/","url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","contentUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","width":1052,"height":592,"caption":"AoboSteel"},"image":{"@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/"]},{"@type":"Person","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7","name":"\uc5d0\ubc18","image":{"@type":"ImageObject","inLanguage":"ko-KR","@id":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","caption":"Evan"},"sameAs":["http:\/\/www.aobosteel.com","https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.instagram.com\/aobosteel\/","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/","https:\/\/x.com\/AobosteelEvan","https:\/\/www.youtube.com\/@aobosteel"],"url":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"}]}},"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"trp-custom-language-flag":false},"uagb_author_info":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"},"uagb_comment_info":0,"uagb_excerpt":null,"rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/ko\/blog\/author\/admin\/"},"rttpg_comment":0,"rttpg_category":null,"rttpg_excerpt":null,"_links":{"self":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages\/19283","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/comments?post=19283"}],"version-history":[{"count":3,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages\/19283\/revisions"}],"predecessor-version":[{"id":19294,"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/pages\/19283\/revisions\/19294"}],"wp:attachment":[{"href":"https:\/\/aobosteel.com\/ko\/wp-json\/wp\/v2\/media?parent=19283"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}