{"id":20474,"date":"2026-10-01T13:06:37","date_gmt":"2026-10-01T05:06:37","guid":{"rendered":"https:\/\/aobosteel.com\/?page_id=20474"},"modified":"2026-10-07T07:11:30","modified_gmt":"2026-10-06T23:11:30","slug":"mold-steel-mechanical-properties","status":"publish","type":"page","link":"https:\/\/aobosteel.com\/es\/mold-steel-mechanical-properties\/","title":{"rendered":"Propiedades mec\u00e1nicas de los aceros para moldes P4, P20 y P21"},"content":{"rendered":" <style> :root{ --aobo-accent:#2563eb; --aobo-accent-dark:#1e1e2e; --aobo-blue:#0c56d0; --aobo-blue-dark:#073b91; --aobo-text:#333; --aobo-muted:#888; --aobo-border:#e5e7eb; --aobo-border-dark:#ddd; --aobo-stripe:#f7f7f9; --aobo-hover:#e8f0fe; --aobo-radius:8px; --aobo-radius-sm:6px; --aobo-orange:#f59e0b; --aobo-fill:#e9ecef; } *{box-sizing:border-box;} html{-webkit-text-size-adjust:100%;} body{margin:0;background:#fff;color:var(--aobo-text); font-family:-apple-system,BlinkMacSystemFont,\"Segoe UI\",Roboto,\"Helvetica Neue\",Arial,sans-serif; font-size:15px;line-height:1.6;} \/* Root scope \u2014 WordPress theme guard *\/ .ts-props{color:var(--aobo-text);background:transparent;padding:0;box-sizing:border-box;line-height:1.6;} .ts-props *{box-sizing:border-box;} .ts-props button,.ts-props input[type=\"text\"]{ background:none !important;border:none !important;border-radius:0 !important;padding:0 !important; margin:0 !important;font-size:inherit !important;font-weight:inherit !important; letter-spacing:normal !important;text-transform:none !important;box-shadow:none !important; line-height:inherit !important;text-decoration:none !important;} .aobo-wrap{max-width:1160px;margin:0 auto;} \/* Hero *\/ .ts-hero{background:#fff;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);overflow:hidden;} .ts-hero-top{padding:1.5em;background:var(--aobo-stripe);border-bottom:1px solid var(--aobo-border);} .ts-kicker{display:inline-flex;align-items:center;gap:6px;color:var(--aobo-accent);background:var(--aobo-hover); border:1px solid var(--aobo-border);border-radius:var(--aobo-radius-sm);padding:4px 8px; font-size:.85em;font-weight:600;margin-bottom:.8em;} .ts-kicker span{width:6px;height:6px;background:var(--aobo-orange);border-radius:50%;display:inline-block;} .ts-hero h1{margin:0;font-size:2rem;line-height:1.3;color:var(--aobo-text);text-align:center;} .ts-hero-top p{margin:.6em auto 0;max-width:820px;font-size:.9em;line-height:1.6;color:var(--aobo-muted);text-align:center;} \/* Tool area *\/ .ts-tool-area{padding:1.5em;} \/* Legend *\/ .ts-legend{display:flex;flex-wrap:wrap;gap:8px;margin-bottom:1em;} .ts-legend > span{display:inline-flex;align-items:center;gap:5px;font-size:.8em;color:var(--aobo-muted); background:var(--aobo-stripe);border:1px solid var(--aobo-border);border-radius:var(--aobo-radius-sm); padding:3px 8px;} .ts-legend b{color:var(--aobo-text);font-weight:600;} .ts-legend .ts-dot{width:9px;height:9px;border-radius:50%;background:var(--aobo-accent);display:inline-block; padding:0;border:0;gap:0;} \/* Controls *\/ .ts-controls{display:flex;flex-wrap:wrap;gap:10px;align-items:center;background:var(--aobo-stripe); border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);padding:1em;margin-bottom:1.2em;} .ts-search{flex:1 1 220px;max-width:340px;position:relative;} .ts-props .ts-search input{width:100% !important;border:1px solid var(--aobo-border-dark) !important; border-radius:var(--aobo-radius-sm) !important;padding:.5em .6em .5em 2em !important; font-size:.92em !important;color:var(--aobo-text) !important;background:#fff !important; outline:none !important;box-shadow:none !important;} .ts-props .ts-search input:focus{border-color:var(--aobo-accent) !important; box-shadow:0 0 0 2px rgba(37,99,235,.12) !important;} .ts-search::before{content:\"\";position:absolute;left:.7em;top:50%;transform:translateY(-50%); width:13px;height:13px;background:var(--aobo-muted); -webkit-mask:url(\"data:image\/svg+xml;utf8,<svg xmlns='http:\/\/www.w3.org\/2000\/svg' viewBox='0 0 24 24' fill='none' stroke='black' stroke-width='2'><circle cx='11' cy='11' r='8'\/><path d='m21 21-4.3-4.3'\/><\/svg>\") center\/contain no-repeat; mask:url(\"data:image\/svg+xml;utf8,<svg xmlns='http:\/\/www.w3.org\/2000\/svg' viewBox='0 0 24 24' fill='none' stroke='black' stroke-width='2'><circle cx='11' cy='11' r='8'\/><path d='m21 21-4.3-4.3'\/><\/svg>\") center\/contain no-repeat;} .ts-chips{display:flex;flex-wrap:wrap;gap:6px;} .ts-props .ts-chip{border:1px solid var(--aobo-border-dark) !important;background:#fff !important; color:var(--aobo-text) !important;border-radius:999px !important;padding:.4em .9em !important; font-size:.8em !important;font-weight:600 !important;cursor:pointer !important;transition:all .15s !important;} .ts-props .ts-chip:hover{background:var(--aobo-hover) !important;border-color:var(--aobo-accent) !important;} .ts-props .ts-chip.on{background:var(--aobo-accent) !important;border-color:var(--aobo-accent) !important;color:#fff !important;} .ts-count{font-size:.8em;color:var(--aobo-muted);margin-left:auto;white-space:nowrap;} \/* Table *\/ .ts-table-wrap{overflow-x:auto;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius); background:#fff;box-shadow:0 1px 2px rgba(16,24,40,.04);} table.ts-table{border-collapse:collapse;width:100%;min-width:880px;font-size:.88em;} .ts-table thead th{position:sticky;top:0;z-index:2;background:var(--aobo-accent-dark);color:#fff; border-bottom:0;border-right:1px solid rgba(255,255,255,.1);text-align:center;padding:.6em .7em; font-size:.82em;font-weight:600;text-transform:none;letter-spacing:.02em;cursor:pointer; white-space:nowrap;user-select:none;} .ts-table thead th:last-child{border-right:0;} .ts-table thead th .ts-arr{color:#ffd166;font-weight:700;margin-left:3px;} .ts-table tbody td{padding:.55em .7em;border-bottom:1px solid var(--aobo-border);text-align:center; vertical-align:middle;white-space:nowrap;} .ts-table tbody tr:nth-child(even){background:var(--aobo-stripe);} .ts-table tbody tr:hover{background:var(--aobo-hover);} .ts-table tbody tr.ts-group td{background:#e8ecf1;font-weight:700;font-size:.78em;letter-spacing:.05em; text-transform:uppercase;color:#3c4043;padding:.55em .7em;border-bottom:1px solid var(--aobo-border); text-align:left;} .ts-table tbody tr:not(.ts-group).ts-hide{display:none;} td.ts-grade{font-weight:700;font-size:.95em;text-align:left;white-space:nowrap;color:var(--aobo-text);} .ts-meter{display:inline-flex;align-items:center;gap:7px;} .ts-meter i{display:inline-block;width:44px;height:6px;border-radius:3px;background:var(--aobo-fill);overflow:hidden;} .ts-meter i b{display:block;height:100%;border-radius:3px;background:linear-gradient(90deg,#4d94ff,var(--aobo-accent));} .ts-meter span{font-size:.9em;font-weight:600;min-width:14px;} .ts-hr{font-variant-numeric:tabular-nums;font-weight:500;} .ts-num{font-variant-numeric:tabular-nums;} .ts-sup{font-size:9px;color:var(--aobo-accent);vertical-align:super;line-height:0;} \/* Footnotes *\/ .ts-notes-list{margin:1.2em 0 0;background:#fff;border:1px solid var(--aobo-border); border-left:3px solid var(--aobo-accent);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0; padding:1em 1.2em 1em 2.2em;font-size:.82em;color:var(--aobo-muted);line-height:1.7;} .ts-notes-list li{margin-bottom:.3em;} .ts-notes-list sup{color:var(--aobo-accent);font-size:10px;} \/* Figure *\/ .ts-fig{margin:1.2em 0 0;background:#fff;border:1px solid var(--aobo-border);border-radius:var(--aobo-radius);padding:1em;} .ts-fig img{display:block;width:100%;height:auto;border-radius:6px;} .ts-fig figcaption{font-size:.8em;color:var(--aobo-muted);margin-top:.6em;line-height:1.6;} .ts-fig figcaption b{color:var(--aobo-text);} \/* Info cards *\/ .ts-grid{display:grid;grid-template-columns:repeat(auto-fit,minmax(250px,1fr));gap:14px;margin-top:1.2em;} .ts-grid .ts-card{background:#fff;border:1px solid var(--aobo-border);border-left:3px solid var(--aobo-accent); border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;} .ts-grid h2{font-size:1em;margin:0 0 .4em;color:var(--aobo-text);} .ts-grid p{font-size:.82em;color:var(--aobo-muted);margin:0;line-height:1.7;} .ts-grid p b{color:var(--aobo-text);font-weight:600;} \/* Disclaimer *\/ .ts-disclaimer{margin-top:1.2em;background:#fff;border:1px solid var(--aobo-border); border-left:3px solid var(--aobo-accent);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0; padding:1em 1.2em;} .ts-disclaimer h3{margin:0 0 .5em;font-size:.95em;color:var(--aobo-text);display:flex;align-items:center;gap:6px;} .ts-disclaimer h3::before{content:\"\\2139\";font-size:1em;color:var(--aobo-accent);} .ts-disclaimer p{margin:0 0 .5em;max-width:none;color:var(--aobo-muted);line-height:1.7;} .ts-disclaimer p:last-child{margin-bottom:0;} \/* Empty \/ source *\/ .ts-empty{display:none;text-align:center;color:var(--aobo-muted);padding:2em 1em;font-size:.9em;} .ts-empty.show{display:block;} .ts-source{margin-top:.8em;color:var(--aobo-muted);font-size:.82em;line-height:1.58;} @media (max-width:860px){ .ts-hero-top,.ts-tool-area{padding:1em;} .ts-controls{flex-direction:column;align-items:stretch;} .ts-search{max-width:none;} .ts-count{margin-left:0;} .ts-hero h1{font-size:1.5rem;} } @media (max-width:520px){ .ts-hero-top,.ts-tool-area{padding:.8em;} table.ts-table{font-size:.82em;} .ts-table thead th,.ts-table tbody td{padding:.4em .4em;} } table.ts-table thead th{cursor:default;} table.ts-table td.ts-grade{font-weight:700;} table.ts-table td.ts-type{white-space:normal;text-align:left;font-size:.92em;color:#555;min-width:150px;} table.ts-table td.ts-long{white-space:normal;text-align:left;vertical-align:top;font-size:.92em;color:#444; min-width:260px;line-height:1.55;} table.ts-table td.ts-safe{white-space:normal;text-align:left;vertical-align:top;} table.ts-table tbody tr:hover{background:var(--aobo-hover);} table.ts-table tbody tr.ts-group:hover td{background:#e8ecf1;} .ts-sec{margin:1.8em 0 .5em;font-size:1.02em;color:var(--aobo-text);font-weight:700;} .ts-sec span{display:block;font-size:.8em;font-weight:400;color:var(--aobo-muted);margin-top:.15em;line-height:1.6;} .ts-table-wrap{margin-top:.6em;} .ts-tcap{margin:.5em 0 0;font-size:.78em;color:var(--aobo-muted);line-height:1.6;} .ts-props a{color:var(--aobo-blue) !important;text-decoration:none !important;} .ts-props a:hover{text-decoration:underline !important;} .ts-rel{margin-top:1.2em;background:#fff;border:1px solid var(--aobo-border); border-left:3px solid var(--aobo-blue);border-radius:0 var(--aobo-radius) var(--aobo-radius) 0;padding:1em 1.2em;} .ts-rel h3{margin:0 0 .5em;font-size:.95em;color:var(--aobo-text);} .ts-rel p{margin:0;font-size:.85em;line-height:1.9;color:var(--aobo-muted);} .ts-rel p a{font-weight:600;}\n<\/style>\n<style id=\"aobo-dl-css\">\n.aobo-ht-ref.ts-props .ts-dl{display:flex !important;flex-wrap:wrap;align-items:center;gap:1em; background:var(--aobo-stripe) !important;border:1px solid var(--aobo-border) !important; border-radius:var(--aobo-radius) !important;padding:1.1em 1.3em !important;margin:1.5em 0 !important;}\n.aobo-ht-ref.ts-props .ts-dl-txt{flex:1 1 340px;font-size:.95em;color:var(--aobo-text) !important;line-height:1.55;}\n.aobo-ht-ref.ts-props .ts-dl-txt strong{display:block;font-weight:700 !important;margin-bottom:.2em;color:var(--aobo-text) !important;}\n.aobo-ht-ref.ts-props a.ts-dl-btn{display:inline-flex !important;align-items:center;gap:.5em; background:var(--aobo-blue) !important;color:#fff !important;border:1px solid var(--aobo-blue) !important; border-radius:var(--aobo-radius-sm) !important;padding:.75em 1.35em !important;font-size:.95em !important; font-weight:600 !important;text-decoration:none !important;white-space:nowrap;box-shadow:none !important; line-height:1.3 !important;text-transform:none !important;}\n.aobo-ht-ref.ts-props a.ts-dl-btn:hover,.aobo-ht-ref.ts-props a.ts-dl-btn:focus{background:var(--aobo-blue-dark) !important; border-color:var(--aobo-blue-dark) !important;color:#fff !important;}\n.aobo-ht-ref.ts-props a.ts-dl-btn svg{width:1.05em;height:1.05em;fill:none;stroke:currentColor;stroke-width:2;flex:0 0 auto;}\n@media (max-width:640px){.aobo-ht-ref.ts-props a.ts-dl-btn{width:100%;justify-content:center;}}\n<\/style>\n<script id=\"aobo-dl-ga4\">\ndocument.addEventListener('click', function (e) { var a = e.target.closest ? e.target.closest('a.ts-dl-btn') : null; if (!a || typeof window.gtag !== 'function') return; window.gtag('event', 'pdf_download', { file_name: 'Aobo-Steel-Mold-Steel-Mechanical-Properties.pdf', link_url: a.href, page_path: window.location.pathname });\n}, false);\n<\/script>\n<style id=\"aobo-ds\">\n.entry-content[class]{--ds-font-body: Lora,serif;--ds-font-head: Lato,sans-serif;--ds-blue: #0c56d0;--ds-blue-deep: #082d6f;--ds-blue-dark: #073b91;--ds-blue-soft: #eaf2ff;--ds-blue-pale: #f7fbff;--ds-border: #d7e5fb;--ds-border-soft: #e8eef8;--ds-text: #203044;--ds-muted: #617087;--ds-orange: #f59b23;--ds-shadow: 0 18px 45px rgba(12,86,208,0.10);--ds-shadow-sm: 0 12px 32px rgba(12,86,208,0.07);font-family: var(--ds-font-body);line-height: 1.7;-webkit-text-size-adjust: 100%;box-sizing: border-box}.entry-content[class] *,.entry-content[class] *::before,.entry-content[class] *::after{box-sizing: border-box}.entry-content[class] h1{font-family: var(--ds-font-head) !important;font-size: clamp(24px,4vw,min(50px,var(--h1-max,50px))) !important;line-height: 1.08 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 0 0 16px !important}.entry-content[class] h2{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 44px 0 16px !important}.entry-content[class] h3{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.3 !important;letter-spacing: 0 !important;font-weight: 400 !important;margin: 30px 0 12px !important}.entry-content[class] h4{font-family: var(--ds-font-head) !important;font-size: 19px !important;line-height: 1.35 !important;letter-spacing: 0 !important;font-weight: 700 !important;margin: 24px 0 10px !important}.entry-content[class] p,.entry-content[class] li,.entry-content[class] dd,.entry-content[class] dt{font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important}.entry-content[class] figcaption,.entry-content[class] small,.entry-content[class] .aobo-figure figcaption{font-size: 15px !important;line-height: 1.6 !important}.entry-content[class] table{width: 100%;border-collapse: collapse;background: #ffffff}.entry-content[class] table th,.entry-content[class] table thead th,.entry-content[class] table thead td{background: var(--ds-blue-soft) !important;color: var(--ds-blue-deep) !important;font-family: var(--ds-font-head) !important;font-size: 15px !important;font-weight: 700 !important;line-height: 1.45 !important;text-align: center !important;text-transform: none !important;letter-spacing: 0 !important;padding: 14px 16px !important;border: 0 !important;border-bottom: 1px solid var(--ds-border) !important;vertical-align: top !important;position: static !important}.entry-content[class] table td{font-family: var(--ds-font-body) !important;font-size: 15px !important;line-height: 1.55 !important;padding: 14px 16px !important;border: 0;border-bottom: 1px solid var(--ds-border-soft) !important;vertical-align: top !important;white-space: normal !important;text-align: center !important}.entry-content[class] table tbody tr:last-child td{border-bottom: 0 !important}.entry-content[class] table th.ds-text,.entry-content[class] table td.ds-text{text-align: left !important}.entry-content[class] table tbody tr:nth-child(even){background: #fafcff !important}.entry-content[class] table tbody tr:hover{background: #f2f7ff !important}.entry-content[class] table tbody td:first-child{color: var(--ds-blue-deep);font-weight: 700}.entry-content[class] .aobo-table-wrap,.entry-content[class] .ts-table-wrap{overflow-x: auto;margin: 22px 0 28px;border: 1px solid var(--ds-border);border-radius: 18px;box-shadow: var(--ds-shadow-sm);background: #ffffff}.entry-content[class] h1,.entry-content[class] h2,.entry-content[class] h3,.entry-content[class] h4{color: var(--ds-blue-deep)}.entry-content[class] p,.entry-content[class] li{color: var(--ds-text)}.entry-content[class] a{color: var(--ds-blue);font-weight: 700;text-decoration: none}.entry-content[class] a:hover,.entry-content[class] a:focus{color: var(--ds-orange)}.entry-content[class] .aobo-final-cta h1,.entry-content[class] .aobo-final-cta h2,.entry-content[class] .aobo-final-cta h3,.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-cta h1,.entry-content[class] .aobo-cta h2,.entry-content[class] .aobo-cta h3,.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-cta-buttons,.entry-content[class] .aobo-cta-buttons *,.entry-content[class] .aobo-esr .stat-band h2,.entry-content[class] .aobo-esr .stat-band h3,.entry-content[class] .aobo-esr .stat-band p,.entry-content[class] .aobo-esr .closing h2,.entry-content[class] .aobo-esr .closing h3,.entry-content[class] .aobo-esr .closing p,.entry-content[class] .footcta h2,.entry-content[class] .footcta h3,.entry-content[class] .footcta p,.entry-content[class] .bg-dark h2,.entry-content[class] .bg-dark h3,.entry-content[class] .bg-dark p,.entry-content[class] .ht-header h2,.entry-content[class] .ht-header h3,.entry-content[class] .ts-cta h2,.entry-content[class] .ts-cta h3,.entry-content[class] .aobo-sup .stats h2,.entry-content[class] .aobo-sup .stats h3,.entry-content[class] .aobo-sup .stats p,.entry-content[class] .aobo-sup .cta h2,.entry-content[class] .aobo-sup .cta h3,.entry-content[class] .aobo-sup .cta p{color: inherit}.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-sup .cta p{color: rgba(255,255,255,0.92)}.entry-content[class] .has-ast-global-color-0-background-color,.entry-content[class] .has-ast-global-color-0-background-color *,.entry-content[class] .contact-container,.entry-content[class] .contact-container *{color: #ffffff !important}.entry-content[class] .has-ast-global-color-0-background-color .label-text,.entry-content[class] .has-ast-global-color-0-background-color .label-text *,.entry-content[class] .contact-container .label-text{color: rgba(255,255,255,0.72) !important}.entry-content[class] .aobo-cta h1,.entry-content[class] .aobo-cta h2,.entry-content[class] .aobo-cta h3,.entry-content[class] .aobo-cta h4,.entry-content[class] .cta h1,.entry-content[class] .cta h2,.entry-content[class] .cta h3,.entry-content[class] .cta h4,.entry-content[class] .aobo-final-cta h1,.entry-content[class] .aobo-final-cta h2,.entry-content[class] .aobo-final-cta h3,.entry-content[class] .aobo-final-cta h4{color: #ffffff !important}.entry-content[class] .aobo-cta p,.entry-content[class] .aobo-cta li,.entry-content[class] .cta p,.entry-content[class] .cta li,.entry-content[class] .aobo-final-cta p,.entry-content[class] .aobo-final-cta li{color: rgba(255,255,255,0.93) !important}.entry-content[class] .aobo-cta p a,.entry-content[class] .aobo-cta li a,.entry-content[class] .cta p a,.entry-content[class] .cta li a,.entry-content[class] .aobo-final-cta p a,.entry-content[class] .aobo-final-cta li a{color: #ffffff !important;text-decoration: underline}.entry-content[class] .aobo-btn-inquiry{color: #ffffff !important}.entry-content[class] .aobo-cta .aobo-btn-inquiry,.entry-content[class] .aobo-final-cta .aobo-btn-inquiry{color: var(--ds-blue) !important}.entry-content[class] .aobo-wrap,.entry-content[class] .aobo-article{max-width: 1180px;margin: 0 auto;padding: 0}.entry-content[class] img{max-width: 100%;height: auto}.entry-content[class] figure{margin: 26px auto 34px;max-width: 860px}.entry-content[class] figure img{display: block;width: 100%;border: 1px solid var(--ds-border);border-radius: 18px;box-shadow: var(--ds-shadow-sm);background: #ffffff}.entry-content[class] .aobo-hero{background: linear-gradient(135deg,#ffffff 0%,#f7fbff 56%,#eaf2ff 100%);border: 1px solid var(--ds-border);border-radius: 28px;padding: 42px 38px;margin-bottom: 24px;box-shadow: var(--ds-shadow);overflow: hidden;position: relative}.entry-content[class] .aobo-hero::after{content: \"\";position: absolute;right: -90px;top: -90px;width: 260px;height: 260px;border-radius: 50%;background: rgba(12,86,208,0.08)}.entry-content[class] .aobo-hero h1,.entry-content[class] .aobo-hero p{position: relative;z-index: 2}.entry-content[class] .aobo-note-box{margin: 34px 0;padding: 22px 24px;border: 1px solid var(--ds-border);border-left: 5px solid var(--ds-orange);border-radius: 16px;background: #fbfdff}.entry-content[class] .aobo-note-box p{margin: 0 0 14px;color: var(--ds-muted) !important;font-style: italic}.entry-content[class] .aobo-note-box p:last-child{margin-bottom: 0}.entry-content[class] .aobo-btn{display: inline-flex;align-items: center;justify-content: center;min-height: 42px;padding: 10px 16px;border-radius: 999px;text-align: center;text-decoration: none;font-family: var(--ds-font-head) !important;font-weight: 700;font-size: 14px !important;line-height: 1.2;transition: all 0.2s ease;cursor: pointer;white-space: nowrap}.entry-content[class] .aobo-btn-primary{background: var(--ds-blue);border: 1px solid var(--ds-blue);color: #ffffff !important}.entry-content[class] .aobo-btn-secondary{background: #ffffff;border: 1px solid var(--ds-border);color: var(--ds-blue) !important}.entry-content[class] .aobo-btn:hover{transform: translateY(-1px)}.entry-content[class] .aobo-supply-actions{display: flex;flex-wrap: wrap;gap: 12px;margin-top: 18px}.entry-content[class] .aobo-supply-actions .aobo-btn{min-width: 190px}.entry-content[class] .aobo-final-cta{margin-top: 34px;padding: 34px;border-radius: 28px;background: linear-gradient(135deg,#073b91 0%,#0c56d0 100%);box-shadow: 0 18px 45px rgba(12,86,208,0.20);display: flex;align-items: center;justify-content: space-between;gap: 20px;flex-wrap: wrap}.entry-content[class] .aobo-final-cta h2{margin: 0 0 12px !important;font-size: 26px !important;color: #ffffff !important}.entry-content[class] .aobo-final-cta p{margin: 0}.entry-content[class] .aobo-final-cta .aobo-btn-primary{background: #ffffff;border-color: #ffffff;color: var(--ds-blue) !important}.entry-content[class] .aobo-final-cta .aobo-btn-secondary{background: transparent;border-color: rgba(255,255,255,0.75);color: #ffffff !important}.entry-content[class] .ts-hero{background: transparent !important;border: 0 !important;border-radius: 0 !important;box-shadow: none !important}.entry-content[class] .ts-hero-top{background: linear-gradient(135deg,#ffffff 0%,#f7fbff 56%,#eaf2ff 100%) !important;border: 1px solid var(--ds-border) !important;border-radius: 28px !important;padding: 42px 38px !important;margin: 0 0 24px !important;box-shadow: var(--ds-shadow) !important;position: relative;overflow: hidden;text-align: left !important}.entry-content[class] .ts-hero-top h1,.entry-content[class] .ts-hero-top p,.entry-content[class] .ts-hero h1{text-align: left !important}.entry-content[class] .ts-hero-top p{max-width: none !important;margin: 0 0 12px !important}.entry-content[class] .ts-tool-area{padding: 0 !important}.entry-content[class] .ts-sec{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 44px 0 16px !important}.entry-content[class] .ts-sec > span{display: block !important;font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important;font-weight: 400 !important;color: var(--ds-text) !important;margin: 0 0 16px !important}.entry-content[class] .ts-kicker{display: inline-flex !important;align-items: center;gap: 7px;margin: 0 0 14px !important;padding: 6px 14px !important;border: 1px solid var(--ds-border) !important;border-radius: 999px !important;background: #ffffff !important;color: var(--ds-blue) !important;font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important;letter-spacing: 0 !important;text-transform: none !important}.entry-content[class] .ts-p,.entry-content[class] .card-desc,.entry-content[class] .aobo-strip-intro,.entry-content[class] .schema-faq-answer{font-family: var(--ds-font-body) !important;font-size: 17px !important;line-height: 1.7 !important;font-weight: 400 !important}.entry-content[class] .lead,.entry-content[class] .fund-lead{font-family: var(--ds-font-body) !important;font-size: 19px !important;line-height: 1.65 !important;font-weight: 400 !important}.entry-content[class] .ts-h2{font-family: var(--ds-font-head) !important;font-size: 30px !important;line-height: 1.25 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 44px 0 16px !important}.entry-content[class] .ts-h3{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.3 !important;font-weight: 400 !important;color: var(--ds-blue-deep) !important;margin: 30px 0 12px !important}.entry-content[class] .card-grade{font-family: var(--ds-font-head) !important;font-size: 23px !important;line-height: 1.25 !important;font-weight: 700 !important}.entry-content[class] .schema-faq-question{font-family: var(--ds-font-head) !important;font-size: 19px !important;line-height: 1.4 !important;font-weight: 700 !important;color: var(--ds-blue-deep) !important}.entry-content[class] .ts-source,.entry-content[class] .ts-hint,.entry-content[class] .ts-placeholder,.entry-content[class] .ht-spec-label,.entry-content[class] .ht-spec-value,.entry-content[class] .ht-step-indicator,.entry-content[class] .ht-badge,.entry-content[class] .idx,.entry-content[class] .xlink,.entry-content[class] .cat-note,.entry-content[class] .aobo-card-note,.entry-content[class] .card-desig,.entry-content[class] .k,.entry-content[class] .v,.entry-content[class] .note,.entry-content[class] .aobo-note{font-family: var(--ds-font-head) !important;font-size: 15px !important;line-height: 1.6 !important;font-weight: 400 !important}.entry-content[class] .ht-spec-label,.entry-content[class] .idx,.entry-content[class] .k{font-weight: 700 !important}.entry-content[class] .aobo-note,.entry-content[class] .note{font-family: var(--ds-font-body) !important;color: var(--ds-muted) !important}.entry-content[class] .chip{font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important}.entry-content[class] .kicker,.entry-content[class] .eyebrow,.entry-content[class] .aobo-eyebrow{display: inline-flex !important;align-items: center;gap: 7px;margin: 0 0 14px !important;padding: 6px 14px !important;border: 1px solid var(--ds-border) !important;border-radius: 999px !important;background: #ffffff !important;color: var(--ds-blue) !important;font-family: var(--ds-font-head) !important;font-size: 13px !important;font-weight: 700 !important;letter-spacing: 0 !important;text-transform: none !important}@media (max-width: 760px){.entry-content[class] h1{font-size: clamp(22px,6.4vw,min(34px,var(--h1-max,34px))) !important}.entry-content[class] h2{font-size: 25px !important}.entry-content[class] h3{font-size: 20px !important}.entry-content[class] h4{font-size: 17px !important}.entry-content[class] p,.entry-content[class] li{font-size: 16px !important}.entry-content[class] table th,.entry-content[class] table td{font-size: 14px !important;padding: 11px 12px !important}.entry-content[class] .aobo-hero{padding: 30px 22px}.entry-content[class] .aobo-final-cta{padding: 26px 22px}.entry-content[class] .aobo-final-cta .aobo-btn{width: 100%}}\n<\/style>\n<section class=\"aobo-ht-ref ts-props\">\n<div class=\"aobo-wrap\">\n<div class=\"ts-hero\">\n<div class=\"ts-hero-top\">\n<div class=\"ts-kicker\"><span><\/span>P4 | P20 | P21 | Mold Steel Properties<\/div>\n<h1 style=\"--h1-max:44px\">Mechanical Properties of Mold Steels P4, P20 and P21<\/h1>\n<p>A mold steel is chosen for the cavity it has to hold, and the figures that decide whether a grade suits the job are the strength, the ductility and the hardness its heat treatment leaves behind. Three mold steels are collected here. P4 is the deepest hardening of the low carbon carburizing grades, P20 is the pre-hardened grade that most machined cavities are cut from, and P21 is the nickel aluminium grade that hardens by precipitation rather than by quenching. Each set of figures belongs to the heat treatment named directly above it, so read it as the result of that treatment rather than as a range for the grade. This is a reference summary of published practice and not a specification of ours.<\/p><\/div>\n<div class=\"ts-tool-area\"> <h2 class=\"ts-h2\">The condition behind each set of figures<\/h2>\n<p class=\"ts-p\">Mold steels are not sold with one set of mechanical properties, because the figures move with the heat treatment. P4 is a low carbon grade that is carburized to give the cavity surface its wear resistance, and the core figures below are for the core alone, air cooled from 955 \u00b0C and tempered at 425 \u00b0C. P20 is normally bought pre-hardened and machined into the cavity at about 300 HB, and the figures below are for the grade taken through a full hardening and tempering cycle instead, oil quenched from 845 \u00b0C and tempered 2 h at 205 \u00b0C. P21 is a different route again. It is solution treated, machined while it is soft, and then aged to its working hardness, so it has two columns of figures rather than one.<\/p>\n<p class=\"ts-p\">All the figures are from one published source, listed under each table with the printed page it comes from. Tensile and yield strength are given in megapascals with the ksi figure in brackets as the source prints it, and the two hardness scales are kept as published, so P4 is reported on the Brinell scale and P20 and P21 on the Rockwell C scale with a Brinell figure alongside.<\/p> <h2 class=\"ts-h2\">Mechanical properties of P4 mold steel<\/h2>\n<h3 class=\"ts-h3\">Core properties after air cooling from 955 \u00b0C and tempering at 425 \u00b0C<\/h3>\n<div class=\"ts-table-wrap\">\n<table class=\"ts-table\" style=\"min-width:620px;\">\n<thead><tr><th>Property<\/th><th>Value<\/th><\/tr><\/thead>\n<tbody><tr><td>Tensile strength, MPa (ksi)<\/td><td class=\"ts-num\">1289 (187)<\/td><\/tr><tr><td>Yield strength, MPa (ksi)<\/td><td class=\"ts-num\">1034 (150)<\/td><\/tr><tr><td>Elongation in 50 mm (2 in.), %<\/td><td class=\"ts-num\">15<\/td><\/tr><tr><td>Reduction of area, %<\/td><td class=\"ts-num\">53<\/td><\/tr><tr><td>CVN impact, J (ft&middot;lbf)<\/td><td class=\"ts-num\">43 (32)<\/td><\/tr><tr><td>Hardness, HB<\/td><td class=\"ts-num\">390<\/td><\/tr><\/tbody>\n<\/table>\n<\/div>\n<p class=\"ts-tcap\"><em>Source, Table 15-3, Core mechanical properties of P4 mold steel air cooled from 955 \u00b0C (1750 \u00b0F) and tempered at 425 \u00b0C (800 \u00b0F) of Tool Steels (G. A. Roberts and G. Krauss).<\/em><\/p>\n<p class=\"ts-p\">P4 is the deepest hardening of the carburizing mold steels, which is why it can be air cooled rather than quenched and still reach core strength in the same band as the quenched grades. The core figure of 1034 MPa yield against 1289 MPa tensile leaves a wide gap between yield and ultimate, and the reduction of area of 53 per cent with an elongation of 15 per cent describes a core that will take shock without cracking. That combination is the reason the grade is chosen for large cavities and for hubbing. The CVN impact figure of 43 J is measured on a standard V notch specimen, and the 390 HB core is the hardness the cavity walls carry behind the carburized case.<\/p> <h2 class=\"ts-h2\">Mechanical properties of P20 mold steel<\/h2>\n<h3 class=\"ts-h3\">Figures after oil quenching from 845 \u00b0C and tempering 2 h at 205 \u00b0C<\/h3>\n<div class=\"ts-table-wrap\">\n<table class=\"ts-table\" style=\"min-width:620px;\">\n<thead><tr><th>Property<\/th><th>Value<\/th><\/tr><\/thead>\n<tbody><tr><td>Tensile strength, MPa (ksi)<\/td><td class=\"ts-num\">1310 (190)<\/td><\/tr><tr><td>Yield strength, MPa (ksi)<\/td><td class=\"ts-num\">1172 (170)<\/td><\/tr><tr><td>Elongation in 50 mm (2 in.), %<\/td><td class=\"ts-num\">13<\/td><\/tr><tr><td>Reduction of area, %<\/td><td class=\"ts-num\">51<\/td><\/tr><tr><td>Hardness, HRC<\/td><td class=\"ts-num\">36-38<\/td><\/tr><\/tbody>\n<\/table>\n<\/div>\n<p class=\"ts-tcap\"><em>Source, Table 15-5, Mechanical properties of P20 mold steel after oil quenching from 845 \u00b0C (1550 \u00b0F) and tempering 2 h at 205 \u00b0C (400 \u00b0F) of Tool Steels (G. A. Roberts and G. Krauss).<\/em><\/p>\n<p class=\"ts-p\">P20 is the grade most machined cavities are cut from, and the figures show why a low tempering temperature is used when the grade is hardened rather than bought pre-hardened. Tempering at 205 \u00b0C leaves 36 to 38 HRC, which is above the 300 HB pre-hardened condition but still low enough to machine and to hold a cavity shape. Yield strength at 1172 MPa sits close to the tensile figure of 1310 MPa, and the elongation of 13 per cent with a reduction of area of 51 per cent is the ductility that keeps a mold from cracking when it is pulled off a part. Raising the tempering temperature trades this hardness away, and the tempering response of the grade is charted on the P20 tool steel heat treatment page linked below.<\/p> <h2 class=\"ts-h2\">Mechanical properties of P21 mold steel<\/h2>\n<h3 class=\"ts-h3\">The solution treated and the aged condition<\/h3>\n<div class=\"ts-table-wrap\">\n<table class=\"ts-table\" style=\"min-width:760px;\">\n<thead><tr><th>Property<\/th><th>Solution treated<\/th><th>Aged<\/th><\/tr><\/thead>\n<tbody><tr><td>Tensile strength, MPa (ksi)<\/td><td class=\"ts-num\">862 (125)<\/td><td class=\"ts-num\">1234 (179)<\/td><\/tr><tr><td>Yield strength (0.2% offset), MPa (ksi)<\/td><td class=\"ts-num\">586 (85)<\/td><td class=\"ts-num\">1138 (165)<\/td><\/tr><tr><td>Elongation in 50 mm (2 in.), %<\/td><td class=\"ts-num\">24<\/td><td class=\"ts-num\">16<\/td><\/tr><tr><td>Reduction of area, %<\/td><td class=\"ts-num\">59<\/td><td class=\"ts-num\">40<\/td><\/tr><tr><td>Hardness, HRC<\/td><td class=\"ts-num\">26 max<\/td><td class=\"ts-num\">36-39<\/td><\/tr><tr><td>Hardness, HB<\/td><td class=\"ts-num\">262 max<\/td><td class=\"ts-num\">341-375<\/td><\/tr><\/tbody>\n<\/table>\n<\/div>\n<p class=\"ts-tcap\"><em>Source, Table 15-6, Mechanical properties of P21 mold steel of Tool Steels (G. A. Roberts and G. Krauss). The solution treated column is the steel quenched from the solution temperature and machined in that condition. The aged column is the same steel after holding 20 to 24 h at the aging temperature.<\/em><\/p>\n<p class=\"ts-p\">P21 hardens by precipitation of a nickel aluminium compound, so it is machined in the solution treated condition at 26 HRC maximum and then aged at a lower temperature to reach its working hardness. The aged column carries 1234 MPa tensile against 862 MPa in the solution treated condition, and yield strength climbs from 586 MPa to 1138 MPa. Ductility falls in step, with elongation dropping from 24 per cent to 16 per cent and reduction of area from 59 per cent to 40 per cent. The hardness range of 36 to 39 HRC after aging is narrower than the range on the quenched and tempered grades, which is the usual reason a mold shop accepts the extra furnace step.<\/p>\n<h3 class=\"ts-h3\">Hardness left by each aging temperature<\/h3>\n<div class=\"ts-table-wrap\">\n<table class=\"ts-table\" style=\"min-width:700px;\">\n<thead><tr><th>Aging temperature (\u00b0C)<\/th><th>Aging temperature (\u00b0F)<\/th><th>Hardness (HRC)<\/th><\/tr><\/thead>\n<tbody><tr><td class=\"ts-num\">510<\/td><td class=\"ts-num\">950<\/td><td class=\"ts-num\">38-41<\/td><\/tr><tr><td class=\"ts-num\">525<\/td><td class=\"ts-num\">975<\/td><td class=\"ts-num\">36-39<\/td><\/tr><tr><td class=\"ts-num\">540<\/td><td class=\"ts-num\">1000<\/td><td class=\"ts-num\">34-38<\/td><\/tr><tr><td class=\"ts-num\">550<\/td><td class=\"ts-num\">1025<\/td><td class=\"ts-num\">29-34<\/td><\/tr><tr><td class=\"ts-num\">565<\/td><td class=\"ts-num\">1050<\/td><td class=\"ts-num\">27-32<\/td><\/tr><\/tbody>\n<\/table>\n<\/div>\n<p class=\"ts-tcap\"><em>Source, Table 15-7, Effect of aging temperature on hardness of P21 mold steel of Tool Steels (G. A. Roberts and G. Krauss). Aging time was 20 to 24 h at each temperature.<\/em><\/p>\n<p class=\"ts-p\">The aging temperature sets the hardness, and the table runs from 510 \u00b0C down to 565 \u00b0C with the hardness falling the whole way. Aging at 510 \u00b0C gives 38 to 41 HRC, and moving the furnace up to 565 \u00b0C drops the range to 27 to 32 HRC. The step between one temperature and the next is 15 \u00b0C, and each step costs the steel a little of its hardness, so the aging temperature is the one control that sets the working hardness of the mold.<\/p> <h2 class=\"ts-h2\">Reading the three grades together<\/h2>\n<p class=\"ts-p\">The three sets of figures answer the same question at different points in the process. P4 gives its core strength only after carburizing and heat treatment, and the case that sits over that core is what carries the wear. P20 reaches a comparable tensile figure in a single hardening and tempering cycle, which is why it is used where the whole block has to be strong rather than just the surface. P21 reaches the highest tensile figure of the three, but only after two furnace steps, one to solution treat the blank and one to age it after machining.<\/p>\n<p class=\"ts-p\">Two cautions apply to all three columns. The first is that the figures belong to the exact heat treatment named in the caption, so a mold run at a higher tempering temperature or aged at a different temperature will sit somewhere else on these scales. The second is that the values are from one published source on one heat of each grade, so confirm the working figures against the test certificate for the heat you buy. A carbide pin or a spacer block that is not loaded in the same way as the cavity may be run well outside these figures.<\/p> <h2 class=\"ts-h2\">Related reference data<\/h2>\n<p class=\"ts-p\">P20 is supplied pre-hardened at about 300 HB and is listed with its forms and section range on <a href=\"https:\/\/aobosteel.com\/p20-tool-steel\/\">P20 tool steel<\/a>, while the hardening, tempering and carburizing cycle for the grade is on <a href=\"https:\/\/aobosteel.com\/p20-tool-steel-heat-treatment\/\">P20 tool steel heat treatment<\/a>. The corrosion resistant mold steels worked in the same chapter correspond to an AISI 420 martensitic stainless steel and are listed on <a href=\"https:\/\/aobosteel.com\/420-stainless-steel\/\">420 stainless steel<\/a>. The choice between a mold steel and a hot work steel for a mold that sees higher temperature is set out on <a href=\"https:\/\/aobosteel.com\/h13-vs-p20-steel\/\">H13 and P20 steel<\/a>, and the properties of the wider tool steel families are on <a href=\"https:\/\/aobosteel.com\/tool-steel-properties-chart\/\">tool steel properties<\/a> and <a href=\"https:\/\/aobosteel.com\/blog\/plastic-injection-mold-steel-selection\/\">plastic mold steel selection<\/a>.<\/p>\n<div class=\"ts-dl\"> <div class=\"ts-dl-txt\"><strong>Mold steel mechanical properties, printable PDF<\/strong> The published tensile strength, yield strength, elongation, reduction of area, impact energy and hardness of P4, P20 and P21 mold steels, together with the hardness left by each aging temperature on P21, in one PDF with our contact details.<\/div> <a class=\"ts-dl-btn\" href=\"https:\/\/aobosteel.com\/wp-content\/uploads\/2026\/10\/Aobo-Steel-Mold-Steel-Mechanical-Properties.pdf\" download> <svg viewBox=\"0 0 24 24\" aria-hidden=\"true\"><path d=\"M12 3v12m0 0 4.5-4.5M12 15l-4.5-4.5M4 20h16\"\/><\/svg> Download PDF, 385 KB <\/a> <\/div>\n<p class=\"ts-source\">Source: Tool Steels (G. A. Roberts and G. Krauss).<\/p>\n<\/div><\/div><\/div><\/section> ","protected":false},"excerpt":{"rendered":"<p>P4 | P20 | P21 | Mold Steel Properties Mechanical Properties of Mold Steels P4, P20 and P21 A mold steel is chosen for the cavity it has to hold, and the figures that decide whether a grade suits the job are the strength, the ductility and the hardness its heat treatment leaves behind. Three [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-20474","page","type-page","status-publish","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v28.6 (Yoast SEO v28.6) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Mold Steel Mechanical Properties for P4, P20 and P21<\/title>\n<meta name=\"description\" content=\"Tensile strength, yield, elongation, impact and hardness of P4, P20 and P21 mold steels after their published heat treatment, with printed sources.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/aobosteel.com\/es\/mold-steel-mechanical-properties\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Mechanical Properties of Mold Steels P4, P20 and P21\" \/>\n<meta property=\"og:description\" content=\"Tensile strength, yield, elongation, impact and hardness of P4, P20 and P21 mold steels after their published heat treatment, with printed sources.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/aobosteel.com\/es\/mold-steel-mechanical-properties\/\" \/>\n<meta property=\"og:site_name\" content=\"AoboSteel\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61565368220197\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-06T23:11:30+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data1\" content=\"7 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/\"},\"author\":{\"name\":\"Evan\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\"},\"headline\":\"Mechanical Properties of Mold Steels P4, P20 and P21\",\"datePublished\":\"2026-10-01T05:06:37+00:00\",\"dateModified\":\"2026-10-06T23:11:30+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/\"},\"wordCount\":1426,\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"inLanguage\":\"es\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/\",\"name\":\"Mold Steel Mechanical Properties for P4, P20 and P21\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\"},\"datePublished\":\"2026-10-01T05:06:37+00:00\",\"dateModified\":\"2026-10-06T23:11:30+00:00\",\"description\":\"Tensile strength, yield, elongation, impact and hardness of P4, P20 and P21 mold steels after their published heat treatment, with printed sources.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/mold-steel-mechanical-properties\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/aobosteel.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Mechanical Properties of Mold Steels P4, P20 and P21\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#website\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"name\":\"AoboSteel\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/aobosteel.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#organization\",\"name\":\"AoboSteel\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"contentUrl\":\"https:\\\/\\\/aobosteel.com\\\/wp-content\\\/uploads\\\/2025\\\/01\\\/cropped-aobo-steel-1.avif\",\"width\":1052,\"height\":592,\"caption\":\"AoboSteel\"},\"image\":{\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/aobosteel.com\\\/#\\\/schema\\\/person\\\/96118415c30ca6bb52eaf1127b052ef7\",\"name\":\"Evan\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g\",\"caption\":\"Evan\"},\"sameAs\":[\"http:\\\/\\\/www.aobosteel.com\",\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61565368220197\",\"https:\\\/\\\/www.instagram.com\\\/aobosteel\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/aobosteel-evan\\\/\",\"https:\\\/\\\/x.com\\\/AobosteelEvan\",\"https:\\\/\\\/www.youtube.com\\\/@aobosteel\"],\"url\":\"https:\\\/\\\/aobosteel.com\\\/es\\\/blog\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Mold Steel Mechanical Properties for P4, P20 and P21","description":"Tensile strength, yield, elongation, impact and hardness of P4, P20 and P21 mold steels after their published heat treatment, with printed sources.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/aobosteel.com\/es\/mold-steel-mechanical-properties\/","og_locale":"es_ES","og_type":"article","og_title":"Mechanical Properties of Mold Steels P4, P20 and P21","og_description":"Tensile strength, yield, elongation, impact and hardness of P4, P20 and P21 mold steels after their published heat treatment, with printed sources.","og_url":"https:\/\/aobosteel.com\/es\/mold-steel-mechanical-properties\/","og_site_name":"AoboSteel","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61565368220197","article_modified_time":"2026-10-06T23:11:30+00:00","twitter_card":"summary_large_image","twitter_misc":{"Tiempo de lectura":"7 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/#article","isPartOf":{"@id":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/"},"author":{"name":"Evan","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7"},"headline":"Mechanical Properties of Mold Steels P4, P20 and P21","datePublished":"2026-10-01T05:06:37+00:00","dateModified":"2026-10-06T23:11:30+00:00","mainEntityOfPage":{"@id":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/"},"wordCount":1426,"publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"inLanguage":"es"},{"@type":"WebPage","@id":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/","url":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/","name":"Mold Steel Mechanical Properties for P4, P20 and P21","isPartOf":{"@id":"https:\/\/aobosteel.com\/#website"},"datePublished":"2026-10-01T05:06:37+00:00","dateModified":"2026-10-06T23:11:30+00:00","description":"Tensile strength, yield, elongation, impact and hardness of P4, P20 and P21 mold steels after their published heat treatment, with printed sources.","breadcrumb":{"@id":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/aobosteel.com\/mold-steel-mechanical-properties\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/aobosteel.com\/"},{"@type":"ListItem","position":2,"name":"Mechanical Properties of Mold Steels P4, P20 and P21"}]},{"@type":"WebSite","@id":"https:\/\/aobosteel.com\/#website","url":"https:\/\/aobosteel.com\/","name":"AoboSteel","description":"","publisher":{"@id":"https:\/\/aobosteel.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/aobosteel.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/aobosteel.com\/#organization","name":"AoboSteel","url":"https:\/\/aobosteel.com\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/","url":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","contentUrl":"https:\/\/aobosteel.com\/wp-content\/uploads\/2025\/01\/cropped-aobo-steel-1.avif","width":1052,"height":592,"caption":"AoboSteel"},"image":{"@id":"https:\/\/aobosteel.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/"]},{"@type":"Person","@id":"https:\/\/aobosteel.com\/#\/schema\/person\/96118415c30ca6bb52eaf1127b052ef7","name":"Evan","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/8e402f2e6f36093f0bf1855dbf79269cde23cd659c44eefdd7ecf7ff9c05786f?s=96&d=mm&r=g","caption":"Evan"},"sameAs":["http:\/\/www.aobosteel.com","https:\/\/www.facebook.com\/profile.php?id=61565368220197","https:\/\/www.instagram.com\/aobosteel\/","https:\/\/www.linkedin.com\/in\/aobosteel-evan\/","https:\/\/x.com\/AobosteelEvan","https:\/\/www.youtube.com\/@aobosteel"],"url":"https:\/\/aobosteel.com\/es\/blog\/author\/admin\/"}]}},"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"trp-custom-language-flag":false},"uagb_author_info":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/es\/blog\/author\/admin\/"},"uagb_comment_info":0,"uagb_excerpt":"P4 | P20 | P21 | Mold Steel Properties Mechanical Properties of Mold Steels P4, P20 and P21 A mold steel is chosen for the cavity it has to hold, and the figures that decide whether a grade suits the job are the strength, the ductility and the hardness its heat treatment leaves behind. Three&hellip;","rttpg_featured_image_url":null,"rttpg_author":{"display_name":"Evan","author_link":"https:\/\/aobosteel.com\/es\/blog\/author\/admin\/"},"rttpg_comment":0,"rttpg_category":null,"rttpg_excerpt":"P4 | P20 | P21 | Mold Steel Properties Mechanical Properties of Mold Steels P4, P20 and P21 A mold steel is chosen for the cavity it has to hold, and the figures that decide whether a grade suits the job are the strength, the ductility and the hardness its heat treatment leaves behind. Three&hellip;","_links":{"self":[{"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/pages\/20474","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/comments?post=20474"}],"version-history":[{"count":4,"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/pages\/20474\/revisions"}],"predecessor-version":[{"id":21078,"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/pages\/20474\/revisions\/21078"}],"wp:attachment":[{"href":"https:\/\/aobosteel.com\/es\/wp-json\/wp\/v2\/media?parent=20474"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}